Guardian Technologies DFT 150/175 Telephone Number Entries / Connection Commands, Default, blank

Page 57

DVST Installation Guide

Calls

10.3Telephone Number Entries / Connection Commands

TELn=

Set telephone entry n to ...

 

(default, blank)

 

Twenty telephone numbers can be stored in memory.

 

Format: TEL2=01044617944965

 

If the MODEM or ISDN Terminal Adapter is to work in the DIRECT

 

mode, the entry can be left blank.

 

Telephone number 0 is the default number dialled when alarms are

 

used to initiate a call to another system. The fall back number if this is

 

engaged is always stored in telephone number 1.

Where a number is used with dual ISDN dialling it is automatically linked with that number plus 10. Therefore Tel number 4 & 14 would be dialled if dual ISDN was selected for that telephone number.

TELn

Set telephone entry n as current

This selects the number that will be dialled initially if the up/down keys are not used to select another.

Format: TEL2

TYPEn= Set telephone entry type to dial via ISDN0, ISDN1, ISDNx2 (dual), or MODEM

(default, ISDN0)

Each of the telephone numbers can be linked to either a PSTN MODEM or an ISDN terminal adapter.

This command determines which of the external ports (MODEM, ISDN Port0, or ISDN Port1) will be used when a particular telephone number is selected.

Format:

TYPE0=ISDN0

TYPE1=ISDN1

TYPE2=ISDN2

TYPE3=MODEM

TYPE4=MODEM2

Example: TYPE5=2

Sets Telephone entry 5 to ISDN2

Dedicated Micros Ltd

Page 45

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Page Page DFT-0150 Installation GuidePage Safety Page FCC and DOC Information Regulatory NotesA. and Canadian Models Only CE MarkPage Table of Contents Modems Demonstration ModeLeased Line Transmission Terminal AdaptersCalls Images and TransmissionGlossary Returns Procedure Alarms & EventsAudio Cable Assemblies1Introduction Event monitoring AlarmsDFT-0150 Transmitter TelemetryPage Unpacking the unit Items in packingPacking the Dvst Page Alarms Feature 3OperationCallback Offline Frozen Alarm Freeze All AlarmsTrack Last Alarm No Frozen ImagesRear Panel connections 4Installation37 Way Alarm Connections Power Inputs5Setup Setup using a PCWhat you require Dvst Commands Remote SetupAuxiliary Port Define Camera InputsDefine Auxiliary Ports 1,2 Default settings AUX1 N 38400Set Port usage Each field entry is separated by a space. If AUX2 N 38400Demonstration mode Demonstration ModeTech Note Demo CableSingle cable operation Connecting the demo cablePage Modem Commands 7ModemsPstn Connection Modem Modem MBAUD= Set Modem port Async baud rate. default 9600, 19200MODSTR= Set type of modem Fast or Sync default, Fast Modem configuration stringsZyxel US Modems Only USER=... Available for user configuration Default, blankDefault, Atdt Modem OperationModem dial string Configuration of modem in direct mode Connecting a modem in direct modeCall request Call answer requestGeneral settings for modems in Atmode Using a modem in AtmodeModem Requirements Action required of Modem Possible AT settingsAll modems Synchronous ModemsMINIT=AT&M1 &D2 &C1 *FLO *OC1 *DTO *DE12 *AA1 Country specific settingsTransmission speed No DialtoneUser=ATX3*BDO&Y1&W1 Where AT*MXnSyncronous mode DIP Switch Settings Synchronous OperationMicrocom Trailblazer Async modeOctocom OSI 8196A Send RETModem RET Modems Dvst Installation Guide This page intentionally blank Terminal Adapters Default, onIsdn Connection Terminal Adapter Sets dual Isdn support on or OFFConfiguring a Terminal Adapter for direct mode operation Connecting a terminal adapter in direct modeMaking a Call Answering a CallDirect Connection Gandalf TA1Ascom 5000 / Citam Step InstructionRemarks ISDN0 RET Atret AT&WRET, ESC ISDN1RET Atret ISDN=ATMODE RET DUALISDN=ON RET Isdnstr = Citam RETAT&WRET ESC Quit RET X21Step Instruction Remarks ‘CONF’‘CHNG’ ‘DIPS’Dataflex TA ISDN=ATMODE RETQuit RET LEASED= Leased line operation, options are default, OFF Dvst set up for leased line operationLeased Line Transmission Leased line terminologyLeased line operation SET UP TX or Master END SET UP RX or Slave ENDAscom 64000 Baseband Modem Page PASSWORD= Set system password to PasswordsSet telephone entry n password to 10CallsOn Screen Titling Default, blank Telephone Number Entries / Connection CommandsSet telephone entry n to FormatDefault, 60 seconds Call connection timeout periodDefault, 30 seconds CALLBACK= Set call back on or OFF Default, offImages and Transmission CAMLO=Sets low resolution cameo operationImage size Target Picture SizesPage Alarm Connections Alarms & EventsAlarm Settings Purpose & intended useImages transmitted on alarm Set contact nn normally openSet contact nn normally closed Set alarm outputs Auto / Manual Default is AutoALMODE= ...Set Alarm operation mode Alarms & Events Dvst Installation Guide Equipment required but not supplied 13AudioConnecting the DAL100 Cable Assemblies 14.1 X21 to V35 Cable Assembly 14.2 X21 Cable Assembly 14.3 V24 Sync Modem Cable Assembly 14.4 RS232 Cable Assembly DVST-PC 14.5 RS232 Cable Assembly DVST-DAL Isdn 15GlossaryPage Event of Difficulty Returns ProcedurePage Dvst Installation Guide Returns Procedure Returns Procedure Dvst Installation Guide

DVST, DFT 150/175 specifications

Guardian Technologies has made significant strides in the air purification industry with its innovative DFT 150 and DFT 175 models, designed to enhance indoor air quality for both residential and commercial spaces. These advanced devices leverage cutting-edge technology to deliver clean, fresh air, addressing the increasing need for effective air purification solutions.

One of the standout features of the DFT series is its multi-stage filtration system. Both the DFT 150 and DFT 175 are equipped with a pre-filter that captures large particles, such as dust and hair, followed by a true HEPA filter. This HEPA filter is capable of capturing 99.97% of airborne pollutants as small as 0.3 microns, including allergens, mold spores, and pet dander. This is an essential feature for individuals suffering from allergies or respiratory issues, ensuring that the air they breathe is significantly cleaner.

In addition to the HEPA filtration, Guardian Technologies has incorporated a UV-C light that works in tandem with the filter system. This technology helps to kill airborne bacteria and viruses, providing an extra layer of protection against pathogens, which is particularly crucial in today’s health-conscious environment.

Another characteristic that sets the DFT 150 and 175 apart is their energy efficiency. Both models are designed to operate quietly and consume minimal energy, making them suitable for continuous use in bedrooms, living rooms, or offices without causing a spike in electricity bills. The DFT 175 model features an added air quality sensor, which monitors and adjusts the fan speed automatically based on the detected air quality, ensuring optimal performance without unnecessary energy expenditure.

The sleek, modern design of the DFT series ensures they blend seamlessly into any decor. With portable options, users can easily move these units from one room to another, providing flexibility in air purification.

Moreover, the DFT models come equipped with easy-to-replace filter indicators, notifying users when it’s time to replace the filters. This convenience promotes consistent air quality management without the hassle of manual reminders.

In conclusion, Guardian Technologies' DFT 150 and DFT 175 models represent an excellent investment for anyone looking to improve indoor air quality. Their sophisticated filtration technology, additional UV-C features, energy efficiency, and user-friendly design make them a top choice for air purifiers in the market today.
Top Page Image Contents