Kenmore 153.333345 Recovery, Dimensions, Tank Type, Ventpipe Diameter, BTU Perhour Inches

Page 5

Thank You for purchasing a Kenmore water heater. Properly installed and maintained, it should give you years of trouble free service. If you should decide that you want the new water heater professionally installed by Sears call 1-800-4-MY-HOME ®. They will arrange for prompt, quality installation by Sears authorized contractors.

Abbreviations Found In This Instruction Manual:

CSA - Canadian Standards Association ANSI - American National Standards Institute NFPA - National Fire Protection Association ASME - American Society of Mechanical Engineers GAMA - Gas Appliance Manufacturers Association

This gas-fired water heater is design certified by CSA INTERNATIONAL under American National Standard/CSA

Standard for Gas Water Heaters ANSI Z21.10.1 • CSA 4.1 (current edition).

Read the "Safety Precautions" section, page 3 of this manual first and then the entire manual carefully. If you don'tfollow the safety rules, the water heater will not operate properly. It could cause DEATH, SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.

This manual contains instructions for the installation, operation, and maintenance of the gas-fired water heater. It also contains warnings through out the manual that you must read and be aware of. All warnings and all instructions are essential to the proper operation of the water heater and your safety. Since we cannot put everything on the first few

pages, READ THE ENTtRE MANUAL BEFORE ATTEMPTING TO INSTALL OR OPERATE THE WATER HEATER.

The installation must conform with these instructions and

the local code authority having jurisdiction. In the absence of local codes, installations shall comply with the following:

In the United States: The National Fuel Gas Code ANSI Z223.1/NFPA 54. This publication is available from the Canadian Standards Association, 8501 East Pleasant Valley Rd, Cleveland Ohio 44131, or The National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269.

If after reading this manual you have any questions or do not

understand any portion of the instructions, call the Sears Service Center.

Carefully plan the place where you are going to put the water heater. Correct combustion, vent action, and vent pipe installation are very important in preventing death from possible carbon monoxide poisoning and fires. See Figure 1.

Examine the location to ensure the water heater complies with the Facts to Consider About the Location section in this

manual.

For California installation this water heater must be braced, anchored, or strapped to avoid falling or moving during an

earthquake. See instructions for correct installation procedures. Instructions may be obtained from your local dealer, wholesaler, public utilities or California Office of the State Architect, 400 P Street, Sacramento, CA 95814.

. Massachusetts Code requires this water heater to be installed in accordance with Massachusetts 248-CMR 2.00:

State Plumbing Code and 248-CMR 5.00.

•Complies with SCAQMD rule #1121 and districts having equivalent NOx requirements.

 

 

 

 

RECOVERY

MINIMUM

 

 

DIMENSIONS

 

TANK

TYPE

 

RATE GALS.

VENTPIPE

DIAMETER

IN INCHES (mm)

 

CAPACITY

OF

BTU

PERHOUR

INCHES

 

INCHES

HEIGHTTO

MODELNUMBER

IN GALS (LTRS)

GAS

RATE

@ 90°F RISE

(mm)

 

(mm)

JACKET TOP

153.333315 HA

30 (114)

NATURAL

32,000

32.8

3" (76)

15

3/4" (400)

55

1/4" (1,403)

153.333345

30(114)

NATURAL

32,000

32.8

3"(76)

153/4"(400)

551/4"(1,403)

153.333415 HA

40(151)

NATURAL

32,000

32.8

3"(76)

18

1/4" (464)

531/4"(1,353)

153.333445

40 (151)

NATURAL

32,000

32.8

3" (76)

18

1/4" (464)

53

1/4" (1,353)

153.333545

50 (189)

NATURAL

32,000

32.8

3" (76)

20

1/4" (514)

55

1/2° (1,410)

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Safety InstructionCare Maintenance Troubleshooting Parts List Installation and service must beImportant Definitions Riskoffire Improper installation and use may result Property damageExplosion Hazard Feel water before bathing or showeringLighting Operating Label Temperature Regulation Water Piping 12-13 TemperatureTank Sediment Cleaning Venting System Inspection Matedal Needed BasicDimensions RecoveryTank Type Ventpipe DiameterBasic Tools Additional Tools Needed When Sweat SolderingMaterials Needed Pilot & Main Burner ThermostatALL Piping Materialsto be Suppliedby Customers FKURE5 Removing the Old Water HeaterFURE2 Fire Hazard Facts to Consider About LocationDoor FURE9 Insulation BlanketsALL AIR from Outdoors See Figures 9, 11,12 ALL AIR from Inside BuildingsProperty Damage Hazard Water PipingWater Damage Hazard Temperature-Pressure Relief ValveInstallation Completed Using Venting Filling the Water HeaterProperty Damage Hazard Breathing Hazard Carbon Monoxide GasFire and Explosion Hazard Gas PipingFire and Explosion Hazard Sediment TrapsGAS Piping with ALL Black Iron Pipeto GAS Control GAS Control For Your Safety Read Before LightingTemperature Regulation Burner Cleaning Tank Sediment Cleaning Burner InspectionVent System Inspection Carbon Monoxide and Fire HazardHousekeeping Temperature-Pressure Relief Valve OperationAnode Rod Inspection DrainingSee Figure Drain Valve Washer ReplacementService Expansion Tank Sizing Chart Thermal Expansion Tank SpecificationsStart Up Conditions Strange SoundsCondensation High Temperature Shut Off SystemSmoke Odor AIR In Hot Water FaucetsFURE27 Operational Conditions Leakage CheckpointsStay LIT Pilot Outage Model Numbers Key No. Part Description Burner AssemblySears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Full ONE Year Warranty on Water HeaterLimited Warranty on Tanks That Leak

153.333315 HA, 153.333445, 153.333415 HA, 153.333545, 153.333345 specifications

The Kenmore 153.333345, 153.333545, 153.333445, 153.333315 HA, and 153.333415 HA air conditioning units represent a diversified range of solutions for both residential and commercial climate control needs. These models are specifically designed to meet the varying requirements of different environments, making them excellent choices for effectively managing indoor temperatures.

One of the main features of these Kenmore models is their advanced energy efficiency. Each unit is equipped with Energy Star certification, ensuring that they consume less electricity compared to standard models. This not only helps consumers save on energy bills but also contributes to environmental sustainability by reducing greenhouse gas emissions.

The cooling capacity of these units is tailored to fit spaces of various sizes. With BTU ratings that range across the different models, users can find an appropriate solution whether they require cooling for a small room or a more expansive area. Additionally, the inclusion of variable speed compressors allows for precise temperature control and improved humidity management, providing enhanced comfort without excessive energy expenditure.

Technologically, these models incorporate modern smart features that make user interaction seamless. Many of the Kenmore units can be controlled via smartphone apps and are compatible with smart home systems. This connectivity allows users to adjust settings, set schedules, and even monitor energy usage remotely.

The design of the Kenmore air conditioners emphasizes ease of installation and maintenance. Their lightweight construction permits simpler setups, while detachable filters ensure that air quality remains high by allowing for easy cleaning and replacement. Moreover, the units feature robust build quality, designed to withstand the rigors of daily use over many years.

In terms of noise levels, Kenmore has prioritized quiet operation. These air conditioners are engineered to operate at lower decibel levels, meaning that they can be used in bedrooms or quiet office spaces without causing disturbances.

In summary, the Kenmore 153.333345, 153.333545, 153.333445, 153.333315 HA, and 153.333415 HA air conditioning units present a blend of energy efficiency, advanced technology, ease of use, and reliability. These features make them excellent choices for anyone looking to optimize indoor comfort while minimizing energy impact.
Top Page Image Contents