Remove the
telescoping wand from
its storage
Telescoping
Wandposition
Remove the crevice tool from its storage position in the wand_ Turn the locking ring to the UNLOCK position. Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the hose°
TO OPERATESUCTIONCONTROL
SLIDE
TELESCOPING WAND
When using attachments for cleaning draperies, small rugs with low pile and other delicate items, twist the suction control slide to the open position This slide is located on the telescoping wand, close to the hose.
This will reduce suction for ease of cleaning.
Lower
To achieve maximum reach with the attach- ments, add the crevice tool to the end of the wand by inserting and twisting slightly°
Hose
Suction
Control
Slide
Wand
Crevice
Tool
The dusting brush and the upholstery tool
may be attached direct!y to the wand or placed on the crevice tool for additional reach.
When using attachments, be careful not to overextend the stretch hose
when reaching. Trying to reach beyond the hose stretch capability could cause the cleaner to tip over.
Wand
Wand
Locking Ring
.Suction
Control
Slide
Upper
Wand
NOTE: Return the suction con- trol slide to the closed
Align the tabs on the extension wand with the "J" slots in the hose. Push the wand into the hose and twist to the right to lock.
position for
Suction normal clean-
Control ing.
Slide