Review this chart to find
an authorized service representative.
Cleaner won't run.
Poor job of dirt pick-upo
1.Unplugged at wall outlet
2.Tripped circuit breaker/blown fuse at household service panel,
3.ON/OFF switch not turned ON
1, Full or clogged dust bag
2.Wrong pile height setting
3.Worn agitator
4.Clogged nozzle or dirt tube
5.Clogged hose.
6, Hole in hose
7.Brokenfmisplaced belt
8.Hose not inserted fully
9,, Motor protection system activated, 10. Dirty filters
1o Plug in firmly, push ON/OFF switch tc ON,
2o Reset circuit breaker or replace fuse.
3, Push ONtOFF switch to ON
Change dust bag, (page I3).
2.Adjust setting, (page 7).
3, Replace agitalor, (page 21)
4o Clean nozzle area, (page 19). 5, Check for clogs, (page 19)
6.Replace hose..
7.Replaceffix belt, (page 17)
B_ Insert hose fully, (page !0). 9. Check for clogs, (page t9)
10. Clean filters, (pages |
Cleaner picks up moveable rugs or pushes too hard°
Light won'twork.
Agltator does not turn°
Performance indicator, some models, is red°
'I,,Wrong pile height setting
1, Burned out light bulb,
1.Broken bell
2.Bare floor seleclor in bare floor setting
3, Belt installed incorrectly
1. Full or clogged dust bag.
2o Dirty filters
3.Clogged airflow passage - dirt tube, nozzle, hose,
4.Certain attachment tools.
Adjust setting, (page 7). |
1. Change light bulb, (page 20)
I.Replace belt, (page 16)
2.Switch selector to the carpet setting, (page 7)
3, Check BELT CHANGING AND AG]TATOR CLEANING, (page 17).
1.Change dust bag, (page 13)
2.Clean filters, (pages
3.Clear clog from airflow passage, (page !9)_
4,, Should return to normal when tool is removed,
Air flow restricted | 1. | Attachment | use restricts | |
with attachment | use, |
| air flow, |
|
Sound changes,. |
| 2. | New carpet | fuzz clogged air path |
Excessive noise | as | 1. | Belt rubbing on carpeL/bare floor | |
vacuum is shut | off. |
| selector shaft, |
1.Check ATTACHMENTS, (page 8),,
2_ Check CLOG REMOVAL and clean hose, (page 19),
1, Push selector all the way forward
22