The vacuum cleaner creates suction that |
| |||
picks up dirL Rapidly moving air carries the |
| |||
dirt to the dust bag through the airflow pas- |
| |||
sages. The dust bag lets the air pass | /) | |||
through, | while it traps | the | dirt. | iSF |
For best | cleaning results, | keep the airflow | /// | |
passage | open° Check | the | starred areas | /_#,,/ |
occasionally for clogs. Unplug from outlet ,Z_7 | ||||
before checking | ,,_7 |
|
",4
1
Motor
Safety
Filter Exhaust
\Filter
BAG CHANGING
For best cleaning results, the dust bag should be changed often, The electronic/ mechanica! baglhose check indicator wi!l come on when the bag needs to be changed or the airflow is blocked, NOTE: See PARTS AND FEATURES for Bag Number.
1. Unplug cord from wall outleL
2, Remove hose from canister.
3. Pull hood release
out and up, then tiff canister hood.
4.Disengage cardboard tab from
red bag mount by |
|
| |||
pulling | away | and |
|
| |
lifting | up |
|
|
|
|
& Pull bag out of |
|
| |||
the red bag | mount. |
|
| ||
|
|
|
| 6. Check | and |
Safe |
|
|
| replace, | if |
|
|
| necessary, the | ||
Fllter | // | // ///, | |||
|
|
|
| motor safety |
filter
_ed Bag
Mount
7.The red bag mount will flip forward after removing bag. This will prevent the lid from closing unlit a new bag is installed.
8.Rotate red bag
mount down and install bag into slots per instructions
pushing down until the cardboard tab locks into position and the holes align. Tuck the bag
securely into the bag cavity so that none of it is able to be pinched by the hood.
9.Close and latch canister hood°
10.Reinstall hose.
!cAUTIoN
NEVER REUSE A DUST BAG, Very fine materials, such as carpet fresh- ener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor. Change bag more often when vacuuming these materi- als.
15