HOW TO START
Personal Injury and Product Damage Hazard
o DO NOT plug in if switch is in ON position, Personal injury or damage could result,
•The cord moves rapidly when rewinding, Keep children away and provide a clear path when rewinding the cord to prevent personal injury.
•DO NOT use outlets above counters° Damage from cord to items in surrounding area could occur_
Cord
Rewlnd1. Pull cord out of canister to desired
length,, The cord will not rewind until the cord rewind bar is pushed.
NOTE: To reduce
the risk of electric shock, this vacuum clean- er has a polarized plug, one blade is wider than the other. This plug will fit in a polar- ized outlet only one way. If the plug does not fit fully in the outlet, reverse the plugo If it still does not fit, contact a qualified electri- cian to install the proper outlet, Do not change the plug in any way.
2_ Plug the polarized power cord into a 120 Volt outlet located near the floor.
To rewind: Unplug the cleaner, Hold
the plug while rewinding to pre- vent damage or injury from the moving cord. Push cord rewind barr
Pile Height
Indicator
Handle
Pile Height Pedal
(Some Models)
3.Lower wand from upright position by pressing on the handle release pedal
E• CAUTION ...........
DO NOT leave the
running in one spot in the upright position for any length of time. Damage to carpet may occur,
4.Select a pile height setting by pressing the small pedal on the rear of the Power- Mate®° The pile height setting shows on the indicator. See SUGGESTED PILE HEIGHT SETTINGS.
Attention: Refer to your carpet manufac- turers cleaning recommendations. Some more delicate carpets may require that they be vacuumed with the