CANISTER
1oOpen the canister hood.
2.Check to see that the dust bag is properly instalted. See BAG CHANGING for instruc- tions,
3.Check to see that the motor safety filter is
properly installed See MOTOR SAFETY FIL- TER CLEANING for instructions.
HOOD AND COVER
It is normal for the canister hood and cover to come off when opened further than need- ed, Line up the hinge slots, insert them, and close the hood and/or cover to replace it.
CAUTION
Never open canister hood with the cover open. This will help to prevent
damage from occurring to the canister hood and!or cover.
HOSE
1.Line up the hose latch tab and notch in can- ister hood and insert hose into canister until it snaps in place_
To remove: Lift hose latch tab upward and pull up on hose.
Handle
Button
Handle
Quick
Release _
(Some _
Hose
Latch
Tab
Notch__
2. Insert han- dle into wand until lock but-
ton snaps in
place Be sure hose is
not twisted.
==
'=' To remove:
_Press handle
quick release button and
To store: Disconnect hose from wands and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.
CoverElectronic
Bag/Hose
Chock
Storage
Hose
Latch Tab
Hood
Release
Dust Bag