CANISTER
1, Open the canister hood.
2.Check to see that the dust bag is proper-
ly installed. See BAG CHANGING for instructions.
3.Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CLEANING for instructions.
HOSE
1.Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place.
To remove: Lift
Hose
Latch
Tab
HOOD AND COVER
it is normal for the canister hood and cover
to come off when opened further than needed. Line up the hinge slots, insert the
hinges into the slots, and close the hood and cover to reinstall.
CAUTION
Never open canister hood with the cover open. This will help to
prevent damage from occurring to the canister hood and/or cover.
hose latch tab
upward and pull up on hose.
Handle
Handle
Quick Release (Some
Hi
Notch
handle into wand until
lock button
snaps in
2. insert H place. Be
sure hose is not twisted.
To remove:
Press handle quick release button and
pull up on handle.
To store: Disconnect
hose from wands and
TO ATrACH CADDY
1.Align the tab on the wand with the slot in the
Tab | |
caddy. |
|
2. Press the |
|
caddy onto the |
|
upper wand. |
|
The caddy will |
|
snap into place |
|
canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.
TO INSERT POWER-MATE JR °
1.Place the front of the Power- Mate Jr.® into the caddy.
2.Rotate the
snaps into place.
TO REMOVE
1.Press the latch and lift the
7