Kenmore 35132 manual Cleaning the Filter, Power Consumption

Page 13

B)CLEANING THE FILTER

Clean the air filter once every two weeks to remove dust build-up and keep the fan in top performance.

Remove the filter: Pull out the filter cover and remove the air filter from the filter cover.

Cleaning: Wash the air filter by immersing it in lukewarm water with a mild detergent. Rinse the filter and dry it in a dark place. Do not put in direct sunlight.

Replace the filter: Attach the filter to the filter cover using the attachment hooks on the inner surface of the cover. Put the filter cover back to the unit.

C) CLEANING THE EXTERIOR

Moisten a soft cloth with mild detergent and water to wipe the unit clean. Be sure not to use a soaking wet cloth.

D) DRAINAGE/EXTENDED PERIOD OF NON-USE

If the air conditioner will not be used for a long period of time, remove the bottom rubber plug from the back hole and attach a section of the Continuous Drain Hose and completely drain the unit of water.

STORAGE

Follow cleaning instructions A-D.

Perform reverse Installation Instructions.

Repack the unit in its original package and store upright in a cool dry place.

Important: Always store and transport the air conditioner upright to maintain the compressor in a proper condition.

TECHNICAL SPECIFICATIONS

MODEL

35132

VOLTAGE

120V~60Hz

POWER CONSUMPTION

1400W

COOLING

HEATING

1200W

COOLING CAPACITY

12,000BTU/h

HEATING CAPACITY

12,000BTU/h

DEHUMIDIFYING CAPACITY (30°C, RH80%)

60L/Day

NOISE LEVEL (Indoor use)

53dB(A)

AIR CIRCUALTION (m³/h)

450

COOLING AGENT

R410A

REMOTE CONTROL

INCLUDED

TIMER

0-24h

DIMENSIONS (WxDxH)

30cmx50.5cmx77.8cm / 12”x20.2”x31.12”

NET WEIGHT

29.5 kg / 65Lbs

13

Image 13
Contents For Household USE only KenmoreImportant Safeguards Page Unpacking Instructions Location of the Portable AIR Conditioner Figure Window KIT InstallationTo Test the Safety Plug Safety PlugTEMP+ PowerLED-DISPLAY How to program a delayed shutdown How to program a delayed start upSpeed Remote Control Operating Instructions Reciever Installation Heating Mode ***UNIT Must be Used in Room for Heat ModeCleaning & Maintenance Power Consumption Cleaning the FilterPower button Unit does not start when pressingWhen turning the unit on I sense a Can I turn the unit on immediatelyCompressor does not activate Error CodesUnit deactivates Unit does not cool correctlyWarranty Period