Kenmore 35132 manual Speed, How to program a delayed start up, How to program a delayed shutdown

6. SPEED

Pressing this button sets the ventilation speed to “(low)”, “(medium)”, “(high)” or “AUTO (Automatic)”. If “AUTO” is selected, the ventilator operates at temperature differences larger than 9 degrees at top speed. If the temperature reduces to a difference smaller than 4 degrees, the ventilator switches to middle blower position. If the temperature reduces further until the target temperature, the ventilator switches to the lowest blower position.

7. TIMER

Programmable timer button for delayed start up or delayed shutdown

How to program a delayed start up

This function is used to set the number of hours delay before the appliance comes on. Proceed as follows:

∙Press [TIMER] button in Stand-by mode (unit is plugged in but not in operation, no display on the panel), to set the number of hours delay before the appliance comes on.

∙Select the required function (cooling, heating, and dehumidification), wait until the unit displays the ambient temperature, and then set the desired temperature.

∙After the set number of hours has expired, the unit starts automatically.

If you press the [POWER] button before the time has expired, the delayed start up will be cancelled, the unit turns on and can be operated in the required operating mode.

How to program a delayed shutdown

This function is used to set the number of hours delay before the appliance goes off. Proceed as follows:

∙Start the unit in required function (cooling, heating or dehumidifying)

∙Press the [TIMER] button during operation and enter the required number of hours delay before the appliance goes off.

∙After the flashing of the number of hours on the LED has stopped, can select the required temperature.

∙After the set number of hours has expired, the unit shuts down automatically.

If you press the [POWER] button before the time has expired, the unit shuts down.

8. SLEEP

This function is ideal for the night as it gradually reduces operation of the appliance. The sleep function maintains the room at optimum temperature and with silent operation.

When you use the sleep function, first set the timer as described in the functions.

Delayed start and delayed shutdown: Press the [TIMER] button until the required hours appear on the display. After the hour display, the display switches automatically to the previous set temperature display.

To change the temperature, press the [TEMP+] or [TEMP-] buttons. With each press on the button, the temperature increases or decreases by 1°C.

8