Radio Shack Two-Zone Burglar Alarm System owner manual Choosing the Components, Sensors

Page 10

49-454.fm Page 10 Wednesday, January 17, 2001 10:37 AM

Battery

Normally-Open Sensors — stop electricity from flowing when not activated. When activated, a normally-open sensor completes the electrical path and signals the alarm center to sound the alarm.

Normally-Closed Sensors — allow electricity to flow when not activated. When activated, normally-closed sensors break the electrical path and signal the alarm center to sound the alarm.

Notes:

Choosing a Location for the Remote Keypad

The remote keypad supplied with your alarm system lets you arm and disarm the system, change the system’s operation, and see status information about the system. You can also purchase up to three additional keypads to use with your alarm system.

•Mount the remote keypads in a location where all family members who will use them can reach them.

•For many installations, it is best to mount the remote keypads near the main entry of your home.

•The remote keypad supplied with your alarm system is not weatherproof. Do not install it in a location where it will be exposed to excessive moisture.

•The remote keypads should not be mounted in a loca- tion where they are exposed to temperatures outside the range of 32–122° F.

CHOOSING THE COMPONENTS

Sensors

Sensors are the eyes and ears of your alarm system. When activated, they send a signal to your alarm center that acti- vates the alarm. Your local RadioShack store carries a full line of sensors.

Sensors are usually classified into two types:

Perimeter Sensors — These sensors protect areas such as doors and windows. Types of perimeter sensors include door and window contacts, window foil, glass-breakage de- tectors, and infrared photorelays.

Area Sensors — Types of area sensors include ultrasonic and infrared motion detectors, vibration detectors, and panic buttons and tamper switches. You can place area sensors such as motion detectors in wide areas such as your living room, or in access areas such as halls. You can place panic buttons just about anywhere.

Decide which entrances or areas an intruder would be most likely to use, and place sensors at those entrances or areas first.

The sensors you can connect to the alarm system should be either normally-open (NO) or normally-closed (NC) for the Delay Zone and Instant Zone, but only normally-open for the Panic/Tamper Zone.

•You cannot mix normally-open and normally-closed sen- sors within one loop.

•Normally-closed sensors are considered more secure than normally-open sensors.

•Unless otherwise noted, you need two-conductor hook- up wire to connect the sensors to the alarm center.

•Refer to your RadioShack catalog for specific types and catalog numbers of each sensor listed here.

The most common types of sensors are:

Magnet Switches — Magnet switches are available in both normally-open and normally-closed types. When mounted, a magnet switch either opens or closes when the object it is attached to is moved, signaling the alarm center to sound the alarm. You can use magnet switches for doors, win- dows, or anywhere you want the alarm to sound when something is moved.

Plunger (Contact) Switches — Plunger switches are avail- able in both normally-open and normally-closed types. You can install a plunger switch inside a door frame on the side with the hinges. This type of switch cannot be seen when the door is closed. You can use plunger switches for doors, win- dows, or any where you want the alarm to sound when something is opened or moved.

Metallic Foil Tape — Metallic foil tape is a normally-closed type of sensor. Install metallic foil tape on the glass just in- side the outer frame of windows that are not movable, such as plate glass or glass inserts in doors. If the glass is broken, the tape also breaks and signals the alarm center to sound the alarm. Mount metallic foil tape around the perimeter of the glass, then connect it to a normally-closed circuit.

Vibration Detectors — Vibration detectors are available in both normally-open and normally-closed types. When these sensors detect vibration on any surface, they signal the alarm center to sound the alarm.

Glass Breakage Detectors — Glass breakage detectors are a type of vibration detector and are available in both nor- mally-open and normally-closed types. You attach a glass breakage detector near a window. If the window is broken or struck, the glass breakage detector signals the alarm center to sound the alarm.

Motion Detectors — The most common types of motion de- tectors are:

•Ultrasonic — Send out an inaudible high-frequency sound, which bounces off objects in the protected area and returns to the sensor. When an object moves in the

10

Preparation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Two-Zone Burglar Alarm System Supplied Items ˆ FeaturesREQUIRED/OPTIONAL Accessories Important Notesˆ a Quick Look at Your Alarm Center/Keypad Power GND DATA2 AnncUnderstanding Zones ˆ PreparationUnderstanding the System Planning Your Security SystemInstant Zone Delayed Zone System Planning Worksheet Room/Area Door Window Sensor Sounder OtherMaking a Shopping List Safeguarding Planning RecordsOther Ways to Improve Security Securing Your Home or OfficeProperty Inventory List Number Model Serial No Value Insured Y/N Where/How MarkedUsing the Tamper Switches Setting UP the SystemChoosing a Location for the Alarm Center Mounting the Alarm CenterChoosing a Location for the Remote Keypad Choosing the ComponentsSensors Sirens and Lights Automatic Telephone DialerConnecting Remote Keypads ˆ InstallationSystem Wiring Connections Mounting the KeypadConnecting Loops of Sensors to the Alarm Center Connecting Sensors Into LoopsSetting the Keypad’s Address Jumpers on Normally-Closed TerminalsConnecting a Siren AND/OR Lights Connecting a PRE-ALARM BuzzerConnecting and Powering a Remote Security Device Connecting AC PowerFm Page 15 Wednesday, January 17, 2001 1037 AM ˆ Operation Sounding a Panic AlarmChanging the Password Arming the SystemSetting the Entry and Exit Delay ˆ Testing the SystemUsing Annunciate Mode System ResetChecking the Indicators Testing the Siren AND/OR LightsWeekly System Check ˆ Care Resetting the AC ADAPTER’S Circuit BreakerReplacing the Fuse ˆ Specifications Limited Ninety-Day Warranty

Two-Zone Burglar Alarm System specifications

The Radio Shack Two-Zone Burglar Alarm System is designed to provide homeowners and small business owners with effective security solutions. This system offers an excellent balance of functionality, reliability, and affordability, making it a popular choice for those looking to enhance their property's safety.

One of the standout features of the Radio Shack Two-Zone Burglar Alarm System is its dual-zone capability. This allows users to monitor multiple areas of their property separately. For example, one zone can be designated for exterior doors, while another can monitor interior spaces, which can help to prevent false alarms triggered by pets or other movements within the home. This feature is particularly useful for larger properties that require more than just a single-point monitoring system.

The system is equipped with multiple sensors, including door and window contacts, which can easily be installed to ensure comprehensive coverage. These sensors are designed to detect unauthorized entry and trigger the alarm whenever a door or window is opened. The system also includes passive infrared motion sensors that can identify movement within a designated area, adding an additional layer of security against intruders.

In terms of technologies, the Radio Shack Two-Zone Burglar Alarm System utilizes a microprocessor-controlled control panel, which is at the heart of the system's operations. This logic board processes signals from all connected sensors and determines when to trigger the alarm. The system can provide alerts via a loud siren, while also allowing for notifications to be sent to the owner’s smartphone or other devices, depending on the model.

The installation process for the Radio Shack burglar alarm system is user-friendly, designed for ease even for those who may not be technically savvy. The system typically includes clear instructions and mounting hardware, making setup straightforward. Users can customize their alarm system according to their specific needs and property layout, which further enhances usability.

Another important characteristic of the Radio Shack Two-Zone Burglar Alarm System is the option for battery backup. This ensures that the alarm continues to operate even during power outages, allowing for uninterrupted security coverage. Moreover, the system is frequently praised for its durability and resistance to environmental factors, making it a robust choice for various settings.

Overall, the Radio Shack Two-Zone Burglar Alarm System represents a practical and efficient security solution, combining essential features, advanced technology, and user-friendly installation, all designed to meet the security needs of modern users.
Top Page Image Contents