Radio Shack Two-Zone Burglar Alarm System ˆ Preparation, Understanding the System, Floor Plan

Page 4

49-454.fm Page 4 Wednesday, January 17, 2001 10:37 AM

ˆPreparation

UNDERSTANDING THE SYSTEM

Your installed alarm system is designed to:

•discourage potential intruders

•scare intruders away before they take your property or harm you or others

•alert you or others if someone breaks into your home

The alarm center is the main control panel for the alarm sys- tem. It includes battery and AC power indicators, connec- tions for sensors and other security devices, battery connection wires, entry and exit delay controls, and a battery test button.

To use the system, you must install sensors and other secu- rity equipment in your home or office and connect them to the alarm center. Then, if a sensor signals the alarm center that its zone has been activated, the alarm center causes an attached alarm device (such as an alarm siren) to sound.

Note: A sensor installed in the panic/tamper zone can acti- vate an alarm, even if the alarm system is not armed.

UNDERSTANDING ZONES

A zone is a single area of coverage, such as a front door, a basement window, an entire room, or an entire home or of- fice. Each zone is protected by one or more sensors (such as a door/window sensor, motion detector, or panic button). You can install as many sensors as you need.

Depending on the type of sensor you use and the settings on the alarm center, you can set up the following types of zones:

•Delayed zone — When the alarm system is armed and a sensor in a delayed zone is activated, the system waits for a preset period before sounding the alarm. This gives you time to open an entry door, walk to a remote keypad inside your home, and disarm the system before it sounds the alarm.

•Instant zone — When the alarm system is armed and a sensor in an instant zone is activated, the system sounds the alarm immediately.

•Panic/Tamper zone — When a sensor in a panic/tamper zone is activated (or when you press the panic button), the alarm system sounds the alarm immediately, even if the system is not armed.

Note: As you plan your alarm system, determine the loca- tions in your home or office you want to protect, then install sensors to protect the zones you set up (see “Planning Your Security System”).

PLANNING YOUR SECURITY SYSTEM

Your alarm system is designed to be the base on which you build a security system for your home or office. Since no two

homes or offices are alike, this system allows you the flexi- bility to design your security system to meet your individual needs.

Proper planning will help you identify your security needs and additional items you must install to meet those needs.

•Check your local and state regulations and ordinances with respect to installing and using home security sys- tems. Be sure to secure any required permits before you continue.

•Become knowledgeable about the different types of sen- sors and security devices you can use with your alarm system. Learn how the devices work before you decide to purchase and install them. This manual cannot explain every possible sensing device and application. Carefully read any instructions provided with the devices you purchase.

Some devices and products mentioned in this manual are not available from your local RadioShack store. We recom- mend that you check stores that sell security equipment if you plan to install security devices that are not available from your local RadioShack store.

RadioShack is not responsible for defects and errors in other manufacturers’ products, and assumes no liability for dam- age to other products or to the alarm system if these prod- ucts are connected to the alarm system.

Floor Plan

Before you start to install your alarm system, we recommend that you make a security plan for your home. Even if you only plan to install a minimal system, take the time to plan a complete one. This will help you if you later decide to ex- pand your security system.

Plan to hide the system’s wiring, not only for cosmetic rea- sons, but to improve the security and effectiveness of the system.

Also, plan to place outside alarm sirens and lights in high lo- cations, out of reach under normal circumstances. This in- creases the range of the devices and helps prevent tampering.

1.Create a basic floor plan including the following informa- tion about each room inside and all areas outside of your home or office:

•Room name

•Interior and exterior walls

•Location of all openings (doors and windows)

•Location of each AC outlet and telephone jack

•Planned location of outside alarm sirens and/or lights

•Measurements of all rooms and interior/exterior walls

•Where you plan to install the alarm center

4

Preparation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Two-Zone Burglar Alarm System ˆ Features REQUIRED/OPTIONAL AccessoriesSupplied Items Important Notesˆ a Quick Look at Your Alarm Center/Keypad Power GND DATA2 Anncˆ Preparation Understanding the SystemUnderstanding Zones Planning Your Security SystemInstant Zone Delayed Zone System Planning Worksheet Room/Area Door Window Sensor Sounder OtherSafeguarding Planning Records Other Ways to Improve SecurityMaking a Shopping List Securing Your Home or OfficeProperty Inventory List Number Model Serial No Value Insured Y/N Where/How MarkedSetting UP the System Choosing a Location for the Alarm CenterUsing the Tamper Switches Mounting the Alarm CenterChoosing a Location for the Remote Keypad Choosing the ComponentsSensors Sirens and Lights Automatic Telephone Dialerˆ Installation System Wiring ConnectionsConnecting Remote Keypads Mounting the KeypadConnecting Sensors Into Loops Setting the Keypad’s AddressConnecting Loops of Sensors to the Alarm Center Jumpers on Normally-Closed TerminalsConnecting a PRE-ALARM Buzzer Connecting and Powering a Remote Security DeviceConnecting a Siren AND/OR Lights Connecting AC PowerFm Page 15 Wednesday, January 17, 2001 1037 AM Sounding a Panic Alarm Changing the Passwordˆ Operation Arming the Systemˆ Testing the System Using Annunciate ModeSetting the Entry and Exit Delay System ResetChecking the Indicators Testing the Siren AND/OR LightsWeekly System Check ˆ Care Resetting the AC ADAPTER’S Circuit BreakerReplacing the Fuse ˆ Specifications Limited Ninety-Day Warranty

Two-Zone Burglar Alarm System specifications

The Radio Shack Two-Zone Burglar Alarm System is designed to provide homeowners and small business owners with effective security solutions. This system offers an excellent balance of functionality, reliability, and affordability, making it a popular choice for those looking to enhance their property's safety.

One of the standout features of the Radio Shack Two-Zone Burglar Alarm System is its dual-zone capability. This allows users to monitor multiple areas of their property separately. For example, one zone can be designated for exterior doors, while another can monitor interior spaces, which can help to prevent false alarms triggered by pets or other movements within the home. This feature is particularly useful for larger properties that require more than just a single-point monitoring system.

The system is equipped with multiple sensors, including door and window contacts, which can easily be installed to ensure comprehensive coverage. These sensors are designed to detect unauthorized entry and trigger the alarm whenever a door or window is opened. The system also includes passive infrared motion sensors that can identify movement within a designated area, adding an additional layer of security against intruders.

In terms of technologies, the Radio Shack Two-Zone Burglar Alarm System utilizes a microprocessor-controlled control panel, which is at the heart of the system's operations. This logic board processes signals from all connected sensors and determines when to trigger the alarm. The system can provide alerts via a loud siren, while also allowing for notifications to be sent to the owner’s smartphone or other devices, depending on the model.

The installation process for the Radio Shack burglar alarm system is user-friendly, designed for ease even for those who may not be technically savvy. The system typically includes clear instructions and mounting hardware, making setup straightforward. Users can customize their alarm system according to their specific needs and property layout, which further enhances usability.

Another important characteristic of the Radio Shack Two-Zone Burglar Alarm System is the option for battery backup. This ensures that the alarm continues to operate even during power outages, allowing for uninterrupted security coverage. Moreover, the system is frequently praised for its durability and resistance to environmental factors, making it a robust choice for various settings.

Overall, the Radio Shack Two-Zone Burglar Alarm System represents a practical and efficient security solution, combining essential features, advanced technology, and user-friendly installation, all designed to meet the security needs of modern users.
Top Page Image Contents