Zoom Dialer 26 manual # 951 ## Route Canadian calls via domestic card default

Page 26

Hang up.

Now you can come off-hook and dial * followed by the North American long-distance number to route North American calls through your dialer.

If you want to use the same calling card for calls going outside North America, you can take the phone off- hook and dial

#2 <key>##

Now coming off-hook and dialing * followed by the international number (011 plus lots of digits) will route international calls through your dialer.

If you want to use a different calling card for calls going outside North America, teach the dialer how to dial the number in LearnMode as follows.

Take your phone off-hook

Press # 0 <key>

Dial the calling card’s access code

Wait for the prompt and dial the international number (011 followed by lots of digits)

Dial ##

Listen for two confirmation beeps

Hang up.

Q:Why won’t my calling card route calls to Alaska, Hawaii, Canada, or the Caribbean?

A:Some cards only process calls within the contiguous U.S. Configure the dialer to route calls to other areas using another card. All the following commands are given after you take your phone off-hook. Note: “Domestic” and “international” refers to the type of call used to set up the card originally in LearnMode.

#952 ## Route Canadian calls via international card

#953 ## Do not route Canadian calls via domestic card (pass through)

#951 ## Route Canadian calls via domestic card (default)

#962 ## Route Caribbean calls via international card

26

Dialer Installation & User’s Guide

Image 26
Contents Dialer Contents Getting Started How the Dialer WorksInstalling the Dialer Dialer North American Calling Setting Up the DialerLearnMode Number Calls Going Outside North America# key phone number Advanced LearnMode Adding KeysPress # 0 key LearnMode Tips Dialer Installation & User’s Guide # 8 0 # # Settings# 8 1 # # #94 local area code###93## Routing CommandsBypassing the Dialer in AutoRoute Mode #6* xxx# yyy # yyy # yyy ## #6 xxx#xxx#xxx###7 xxx ## #7* xxx # yyy ###*60## first tones same as other tones default Dialer Tone Settings#*33## for Medium tones nominally -6dBm default #*43## For 100 millisecond tones defaultUsing the Dialer Dialer Installation & User’s Guide Why isn’t the dialer routing my calls? Frequently Asked QuestionsWhen I dial, why do the dialed digits sometimes sound soft? How can I make the dialer dial faster? Wait for dialtone # * 7 1 # ## * 8 1 # # Dialer Installation & User’s Guide Does the dialer work with rotary or pulse phones? # 2 # # # 2 key # ##2## Can I use keys to route 101xxxx calls?#2 key## #2## # 951 ## Route Canadian calls via domestic card default # 961 ## Route Caribbean calls via domestic card default # 971 ## Route AK/HI calls via domestic card defaultSelect Dialing Mode Command SummaryDialer Learns a Calling Card using LearnMode Erase all dialer programming Caution Change Dialing VolumeKill a command that’s in progress Dialer LED Definitions LED Pattern MeaningCopyright 2003 All rights reserved 1953-P2 27277 2003