Dialer LED Definitions
The dialer’s LED can give you useful information about the dialer and the line it’s connected to. Here is a table that shows the LED’s blinking patterns and what they mean.
LED Pattern |
| Meaning | |
|
|
| |
ON |
| When the LED is ON solidly, it indicates that | |
☼ |
| the dialer’s short phone cord is plugged into | |
| the wrong dialer jack. Please plug this short | ||
|
| phone cord into the dialer’s other jack. | |
|
|
| |
OFF |
| The dialer is OFF HOOK. | |
|
| This is usually because someone is using a | |
|
| phone or a modem or fax. The LED will also | |
|
| be OFF if the dialer has no power. | |
|
| ||
One Blink Every Second: | This pattern of one blink per second indicates | ||
☼ ☼ ☼ ☼ ☼ ☼ ☼ | that the dialer is in normal (manual) mode, | ||
and the line is ON HOOK. The dialer is ready | |||
Repeats Continuously | to route calls. | ||
| |||
|
| ||
Two Rapid Blinks Every | This pattern of two blinks per second indicates | ||
Second: |
| that the dialer is in normal mode with keys | |
☼☼ ☼☼ ☼☼ ☼☼ ☼☼ | active, and the line is ON HOOK. The dialer is | ||
ready to route calls. | |||
|
| ||
Repeats Continuously |
| ||
|
| ||
Three Rapid Blinks Every | This pattern of one blink per second indicates | ||
Second: |
| that the dialer is in AutoRoute Mode, and the | |
☼☼☼ ☼☼☼ ☼☼☼ | line is ON HOOK. The dialer is ready to route | ||
calls. | |||
|
| ||
Repeats Continuously |
| ||
|
| ||
Four Rapid Blinks Every | This pattern of four blinks per second | ||
Second: |
| indicates that the dialer is in AutoRoute | |
☼☼☼☼ ☼☼☼☼ ☼☼☼☼ | Mode with keys active, and the line is ON | ||
HOOK. The dialer is ready to route calls. | |||
|
| ||
Repeats Continuously |
| ||
|
| ||
Other Blinking Patterns | The dialer will blink in other patterns when first | ||
☼ ☼☼☼ | ☼☼ | powered up and while routing calls. | |
This is normal. | |||
|
| ||
|
|
| |
30 | Dialer Installation & User’s Guide |