Zoom Dialer 26 manual Advanced LearnMode Adding Keys, Press # 0 key, # key phone number

Page 8

Advanced LearnMode: Adding Keys

You can define privacy keys in Advanced LearnMode. Keys configure the dialer so that only people who know the keys can use the dialer. Roommates with different calling cards can share a single dialer if each roommate has his or her own key. Keys are also convenient if you want to use different calling cards to dial different countries. You can assign a different key for each card you use.

Once you program a key, the dialer will only route calls after someone enters the key. Typically, if you don’t dial the key, the dialer will let your call go through your normal long distance provider. (In AutoRoute Mode, if you don’t dial a key, the dialer won’t route your call, and will issue an error tone.) The dialer will accept up to seven keys.

Advanced LearnMode is just like LearnMode, except you add a key to the commands.

You only have to do Advanced LearnMode once for each calling card and call type. The dialer will route all appropriate numbers once you have completed Advanced LearnMode.

Keys are two-digit numbers. You may use any two digit number from 00 to 99. Keys may not contain * or #.

To set up Advanced LearnMode for calls within North America, do the following:

1.Take your phone off-hook

2.Press # 0 <key>

3.Wait for dial tone

4.Make a North American toll call using your calling card

5.Listen for two confirmation beeps

Let your call go through, or hang up, as you prefer.

Now when you want to make a call within North America using this prepaid phone card and key, take your phone off-hook and dial

* # <key> <phone number>

If you have any trouble, please see LearnMode Tips on page 9.

8

Dialer Installation & User’s Guide

Image 8
Contents Dialer Contents Getting Started How the Dialer WorksInstalling the Dialer Dialer North American Calling Setting Up the DialerLearnMode Number Calls Going Outside North America# key phone number Advanced LearnMode Adding KeysPress # 0 key LearnMode Tips Dialer Installation & User’s Guide Settings # 8 1 # ## 8 0 # # #94 local area code###93## Routing CommandsBypassing the Dialer in AutoRoute Mode #6 xxx#xxx#xxx## #7 xxx ###6* xxx# yyy # yyy # yyy ## #7* xxx # yyy ##Dialer Tone Settings #*33## for Medium tones nominally -6dBm default#*60## first tones same as other tones default #*43## For 100 millisecond tones defaultUsing the Dialer Dialer Installation & User’s Guide Why isn’t the dialer routing my calls? Frequently Asked QuestionsWhen I dial, why do the dialed digits sometimes sound soft? How can I make the dialer dial faster? Wait for dialtone # * 7 1 # ## * 8 1 # # Dialer Installation & User’s Guide Does the dialer work with rotary or pulse phones? # 2 # # # 2 key # ##2## Can I use keys to route 101xxxx calls?#2 key## #2## # 951 ## Route Canadian calls via domestic card default # 961 ## Route Caribbean calls via domestic card default # 971 ## Route AK/HI calls via domestic card defaultSelect Dialing Mode Command SummaryDialer Learns a Calling Card using LearnMode Erase all dialer programming Caution Change Dialing VolumeKill a command that’s in progress Dialer LED Definitions LED Pattern MeaningCopyright 2003 All rights reserved 1953-P2 27277 2003