Zoom Dialer 26 manual #2##

Page 25

Now you can come off-hook and dial * followed by the North American long-distance number to route North American calls through your dialer.

If you want to use the same calling card for calls going outside North America, you can take the phone off- hook and dial

#2##

Now coming off-hook and dialing * followed by the international number (011 plus lots of digits) will route international calls through your dialer.

If you want to use a different calling card for calls going outside North America, teach the dialer how to dial the number in LearnMode as follows.

Take your phone off-hook

Press # 1

Dial the calling card’s access code

Wait for the prompt and dial the international number (011 followed by lots of digits)

Dial ##

Listen for two confirmation beeps

Hang up.

Now you can come off-hook and dial * followed by the number outside North America to route these calls through your dialer.

Q:Can I use keys to route calls using a calling card that doesn’t require a PIN?

A:Yes, and you can do this with or without AutoRouting. Teach the dialer how to dial the number in Advanced LearnMode as follows. A key is two digits, using only the numbers 0-9, and not * or #.

Take your phone off-hook

Press # 0 <key>

Dial the calling card’s access code

Wait for the prompt and dial the long-distance number (1 followed by 10 digits)

Dial ##

Listen for two confirmation beeps

Frequently Asked Questions

25

Image 25
Contents Dialer Contents How the Dialer Works Getting StartedInstalling the Dialer Dialer LearnMode Setting Up the DialerNorth American Calling Calls Going Outside North America NumberPress # 0 key Advanced LearnMode Adding Keys# key phone number LearnMode Tips Dialer Installation & User’s Guide # 8 1 # # Settings# 8 0 # # #94 local area code##Bypassing the Dialer in AutoRoute Mode Routing Commands#93## #7 xxx ## #6 xxx#xxx#xxx###6* xxx# yyy # yyy # yyy ## #7* xxx # yyy ###*33## for Medium tones nominally -6dBm default Dialer Tone Settings#*60## first tones same as other tones default #*43## For 100 millisecond tones defaultUsing the Dialer Dialer Installation & User’s Guide When I dial, why do the dialed digits sometimes sound soft? Frequently Asked QuestionsWhy isn’t the dialer routing my calls? How can I make the dialer dial faster? # * 8 1 # # # * 7 1 # #Wait for dialtone Dialer Installation & User’s Guide Does the dialer work with rotary or pulse phones? # 2 key # # # 2 # #Can I use keys to route 101xxxx calls? #2###2 key## #2## # 951 ## Route Canadian calls via domestic card default # 971 ## Route AK/HI calls via domestic card default # 961 ## Route Caribbean calls via domestic card defaultDialer Learns a Calling Card using LearnMode Command SummarySelect Dialing Mode Kill a command that’s in progress Change Dialing VolumeErase all dialer programming Caution LED Pattern Meaning Dialer LED DefinitionsCopyright 2003 All rights reserved 1953-P2 27277 2003