Mitel 5330 Headset Alerting Tones and LEDs, Answer a call, Hang up, Dialing - Auto Dial Disabled

Mitel 5330/5340 IP Phones – User Guide

Answer a call

Do one of the following:

•Lift the cordless headset from the cradle.

•If the headset is already out of the cradle, press the hookswitch button on the headset.

Hang up

Do one of the following:

•Replace the cordless headset in the cradle.

•If the headset is already out of the cradle, press the hookswitch button on the headset.

Dialing – Auto Dial Disabled

To dial a number with Auto Dial disabled:

1.Lift the headset or press the hookswitch.

2.Make the call using the dial pad, or press a programmed speed dial key on the phone.

Dialing – Auto Dial Enabled

To dial with Auto Dial enabled:

•To dial the predefined Auto Dial number, press the hookswitch on the cordless handset or headset.

To program Auto Dial, refer to “Using the Cordless Devices Application” on page 46.

Headset Alerting Tones and LEDs

The cordless accessories provide the following alerting tones:

Feature	Function
Mute ON/OFF	2-pitch tone occurs immediately. Reminder tone occurs
	30 seconds after activation and then regularly until
	deactivated.
Mute key on Phone ON/OFF	No immediate tone. Reminder tone occurs 30 seconds
	after activation and then regularly until deactivated.
Low battery (within 10 minutes left)	3 beeps and 20 second pause
Low battery (within 2 minutes left)	3 rapid beeps and 1.5 second pause
Out of range	Repetitive 3-pitch tone until you are back in range.
	The call remains established if you return within range
	within 10 seconds; otherwise the call is dropped.

44