Zoom Dialer 26 manual LearnMode Tips

Page 9

If you want to make calls outside North America, teach the dialer how to dial the number in Advanced LearnMode as follows. (You can use the same key you used for calls to North America, if you want to).

Keys are two-digit numbers. You may use any two digit number from 00 to 99. Keys may not contain * or #.

1.Take your phone off-hook

2.Press # 0 <key>

3.Wait for dial tone

4.Make a call outside North America using your calling card

5.Listen for two confirmation beeps

6.Let your call go through, or hang up, as you prefer.

Now when you want to make an international call using this prepaid phone card and key, take your phone off- hook and dial

* # <key> <phone number>

If you have any trouble, please see LearnMode Tips below. Otherwise please go to the Settings section on page 11.

LearnMode Tips

As you use your calling card in LearnMode, the calling card service will prompt you for various information. Make sure you listen carefully to each prompt before dialing. Also, while you are dialing an entry, try to dial as evenly as possible, without leaving long pauses between digits.

About 12 seconds after you have completed dialing, the dialer will send two short beeps to show that the dialer has learned how to dial using your calling card. If you make any mistakes as you dial, or if you don’t hear the acknowledgment beeps, hang up and then start again.

It’s a good idea to check that the call goes through, so that you can be sure you entered all the numbers correctly. It’s also a good idea to make a call to check that the dialer correctly routes calls using your calling card. If either call doesn’t go through, repeat LearnMode, waiting a little

Setting Up the Dialer

9

Image 9
Contents Dialer Contents How the Dialer Works Getting StartedInstalling the Dialer Dialer Setting Up the Dialer LearnModeNorth American Calling Calls Going Outside North America NumberAdvanced LearnMode Adding Keys Press # 0 key# key phone number LearnMode Tips Dialer Installation & User’s Guide # 8 1 # # Settings# 8 0 # # #94 local area code##Routing Commands Bypassing the Dialer in AutoRoute Mode#93## #7 xxx ## #6 xxx#xxx#xxx###6* xxx# yyy # yyy # yyy ## #7* xxx # yyy ###*33## for Medium tones nominally -6dBm default Dialer Tone Settings#*60## first tones same as other tones default #*43## For 100 millisecond tones defaultUsing the Dialer Dialer Installation & User’s Guide Frequently Asked Questions When I dial, why do the dialed digits sometimes sound soft?Why isn’t the dialer routing my calls? How can I make the dialer dial faster? # * 7 1 # # # * 8 1 # #Wait for dialtone Dialer Installation & User’s Guide Does the dialer work with rotary or pulse phones? # 2 key # # # 2 # #Can I use keys to route 101xxxx calls? #2###2 key## #2## # 951 ## Route Canadian calls via domestic card default # 971 ## Route AK/HI calls via domestic card default # 961 ## Route Caribbean calls via domestic card defaultCommand Summary Dialer Learns a Calling Card using LearnModeSelect Dialing Mode Change Dialing Volume Kill a command that’s in progressErase all dialer programming Caution LED Pattern Meaning Dialer LED DefinitionsCopyright 2003 All rights reserved 1953-P2 27277 2003