Therma-Stor Products Group Ultra-Aire 100V owner manual 3H Intermittent or Programmed Ventilation

Page 15

FOR HVAC INSTALLER ONLY AND HOMEOWNER

The ventilation indicator “O” will be displayed whenever the unit is ventilating. The fan operation indicator “O” will also be lit.

There are three damper operation modes, “OPEN – hold,” “CLOSED – hold” and “PROGRAM” (denoted by “ON TIME”

“OFF TIME.” Refer to section 3.8). With the damper in the “OPEN – hold” mode, the damper will be open and the fan of the system will be operating in order to introduce fresh air into the space. Use this mode for continuous fresh air ventilation. The fan is always on when the damper is open. When in “CLOSED

hold” mode, the damper will not open and the system will not ventilate.

When in the “program” mode, the control will operate the damper and fan (ventilate) according to the programmed ventilation schedule (See Section 3.8).

To set the damper operation:

1.Press the “VENT” button. The current setting will begin to flash on the display. Release the button.

2.Press the “VENT” button again to toggle between “open,” “closed” and “program.”

3.Leave the control alone for 10 seconds to select the indicated damper mode and return to “home.”

5.3H Intermittent or Programmed Ventilation

This example shows the damper in “PROGRAM” mode (denoted by the schedule 15 minutes on, 5 minutes off).

The status of the damper is show here. is open, blank is closed.

The system will operate the ventilation function according to the current ventilation program. The control needs to be programmed to turn the ventilation function on and off at the desired intervals. This is done by programming the ventilation timer.

There are two programs available for ventilation Monday through Friday. There are also two programs for Saturday and Sunday. No other choice of days is available.

Each program has:

A “START” time of day when the ventilation schedule begins.

An “OPEN FOR” duration for the amount of time the damper stays open in 5 minute intervals, from 0 to 60.

A “CLOSED FOR” duration which closes the vent for a specified time in 5 minute intervals from 0 to 60.

Example:

1.Press “program enter” button. The following menu appears:

2.Using the up/down RH buttons, select “program.” The following menu appears:

You can select from:

“MON-FRI”or “SAT-SUN” for separate weekday/weekend schedules or “MON-SUN”which gives you equal weekday/ weekend schedules.

Menu when you select “MON-FRI”or SAT-SUN”:

1.Enter the starting time for weekdays using the up/down RH keys to change the time.

15

Ultra-Aire 100V Installer’s & Owner’s Manual

Image 15
Contents Serial No DehumidificationFresh Air Ventilation Air FiltrationTable of Contents Safety Precautions Safety PrecautionsIntended Application for Ultra-Aire For Hvac Installer onlySpecifications Installation4C Ducting for Fresh Air Quiet Installation ControlsHumidity/Fan Control Panel Ventilation Timer Ventilation Timer and Humidity Control PanelHumidity Control Adjustment Fan/Filter SwitchHigh Efficiency Air filter DEH 3000 Digital Control 2A Install Instructions 2B WiringDEH 3000 Digital Control Installation Instructions Engage A/C during dehumidification 2C Auxiliary relay operation2D Dehumidifier lockout/activation AC sensor Dehumidification2E Location 2F Testing3D Setting Clock Time For Hvac Installer and Homeowner3B Setting 3C On/Off SettingFor Hvac Installer only and Homeowner 3F Fan Setting and OperationOperation 3H Intermittent or Programmed Ventilation 3J Default Settings 3I Temperature Cutout ProgrammingService Maintenance6A Checking Compressor Motor Circuits Fan ReplacementCompressor/Capacitor Replacement Refrigerant Charging7A Humidity Control Remote Controls6B Replacing a Burned Out Compressor 6C Replacing a Compressor, Nonburn Out7B Programmable Ventilation Timer Defrost ThermostatElectric Ventilation Damper ULTRA-AIR 100V Electrical Schematic ULTRA-AIRE 100V Pictorial Electrical Diagram QTY ULTRA-AIRE 100V Service Parts List28 30 33 29 30 33 36 ULTRA-AIRE 100V Optional Parts ListULTRA-AIRE 100V External Insulation KIT ULTRA-AIRE 100V Control Panel Installation ULTRA-AIRE 100V Dehumidifier Limited Warranty PO Box 8680 Madison, WI Phone 608-222-5301 Fax

Ultra-Aire 100V specifications

The Ultra-Aire 100V by Therma-Stor Products Group is a powerful and efficient ventilating dehumidifier designed to tackle excess moisture in residential spaces. Known for its compact design and advanced technology, the Ultra-Aire 100V is an ideal solution for basements, crawl spaces, and high humidity areas.

One of the main features of the Ultra-Aire 100V is its high extraction capacity. With the ability to remove up to 100 pints of moisture per day, it effectively manages humidity levels, helping to prevent mold growth, mildew, and structural damage. This unit is equipped with an energy-efficient compressor that ensures optimum performance while minimizing energy consumption, making it an environmentally friendly choice for homeowners.

In addition to its powerful dehumidification capabilities, the Ultra-Aire 100V incorporates innovative technologies for enhanced functionality. The unit is designed with a built-in digital humidity control system, allowing users to set their desired humidity level with precision. The humidity control automatically adjusts the unit's operation, ensuring consistent moisture levels throughout the home.

Another key characteristic of the Ultra-Aire 100V is its convenience in installation and operation. The unit can be ducted into existing HVAC systems or operated as a standalone unit, providing flexibility to fit various home configurations. Its compact size also makes it easy to install in tight spaces, such as crawl spaces and attics, without sacrificing performance.

For added convenience, the Ultra-Aire 100V features a user-friendly interface. The digital display provides clear visibility of the current humidity level and operational status, while the built-in timer allows for programming operational schedules. This means homeowners can set the dehumidifier to run during specific times, optimizing performance and energy usage.

Durability is another hallmark of the Ultra-Aire 100V. Constructed with high-quality materials, this unit is built to withstand the challenges of damp environments, ensuring long-lasting performance. Additionally, its advanced filtration system captures airborne particles, improving indoor air quality by removing allergens and dust.

In conclusion, the Therma-Stor Products Group Ultra-Aire 100V stands out as a reliable dehumidification solution. With its high extraction capacity, energy-efficient operation, user-friendly controls, and durable build, this dehumidifier is an excellent choice for homeowners seeking to maintain a healthy and comfortable indoor environment. Whether combating humidity in a basement or managing moisture in a crawl space, the Ultra-Aire 100V proves to be an indispensable tool for humidity control.