Therma-Stor Products Group Ultra-Aire 100V owner manual ULTRA-AIRE 100V Control Panel Installation

Page 26

ULTRA-AIRE 100V CONTROL PANEL INSTALLATION

1.The following installation instructions are for both new construction and retrofit applications. For new construction, it is recommended that the control box be installed after the drywall is in. Prior to drywall installation, the control wires can be positioned to come through the drywall about 5' 2" above the floor and at least 3" left or right of any stud.

2.Locate the box bottom about 5' above the floor. Locate the left and right box sides at least 2" from any stud. Use the back of the control box as a template to make the rectangular drywall cutout (5-13/16" wide by 4-1/16" high). DO NOT oversize the cutout, especially the height.

3.Feed the low voltage control wires into the box back through the rubber grommet.

4.Place the box in the hole and put the mounting tabs through the slots in the box sides as shown.

5.Place the two 3⁄4" long, #8 screws through the tab slots and into the holes in the box sides.

6.Tighten the screws until the tab ears press firmly against the drywall back, causing the upper and lower box flanges to press tightly against the drywall front.

7.Connect the control wires to the control panel leads per the installation sheet taped to the Ultra-Aire side or per the manual.

8.Fasten the control panel to the box flanges with the 1⁄2" long, #6 screws provided.

9.Slide the cover over the control panel screw head at the panel top so it catches in the keyhole on the back of the cover (see detail below). The cover hides the control panel when it is not being programmed.

10.The sheet under the cover glass can be replaced with artwork of the customers’ choice.

STUDS

 

 

 

 

HOOK COVER KEYHOLE

 

 

 

CONTROL

 

2" MINIMUM

 

STUD

#8 SCREW

SLOT OVER SCREW HEAD

 

WIRES

 

 

 

 

4 1/16"

 

 

 

 

 

5 13/16"

MOUNTING

 

 

 

 

 

 

 

5'

TAB

 

#6 SCREW

 

 

 

 

 

 

KEYHOLE SLOT

 

COVER

 

 

 

 

 

 

FLOOR

 

TOP VIEW OF INSTALLED

 

 

CUT-OUT DETAIL

 

BOX AND CONTROL PANEL

 

 

26

Ultra-Aire 100V Installer’s & Owner’s Manual

Image 26
Contents Air Filtration DehumidificationFresh Air Ventilation Serial NoTable of Contents Safety Precautions Safety PrecautionsInstallation For Hvac Installer onlySpecifications Intended Application for Ultra-Aire4C Ducting for Fresh Air Humidity/Fan Control Panel Quiet InstallationControls Fan/Filter Switch Ventilation Timer and Humidity Control PanelHumidity Control Adjustment Ventilation TimerHigh Efficiency Air filter DEH 3000 Digital Control DEH 3000 Digital Control Installation Instructions 2A Install Instructions2B Wiring Dehumidification 2C Auxiliary relay operation2D Dehumidifier lockout/activation AC sensor Engage A/C during dehumidification2F Testing 2E Location3C On/Off Setting For Hvac Installer and Homeowner3B Setting 3D Setting Clock TimeOperation For Hvac Installer only and Homeowner3F Fan Setting and Operation 3H Intermittent or Programmed Ventilation 3I Temperature Cutout Programming 3J Default SettingsMaintenance ServiceRefrigerant Charging Fan ReplacementCompressor/Capacitor Replacement 6A Checking Compressor Motor Circuits6C Replacing a Compressor, Nonburn Out Remote Controls6B Replacing a Burned Out Compressor 7A Humidity ControlElectric Ventilation Damper 7B Programmable Ventilation TimerDefrost Thermostat ULTRA-AIR 100V Electrical Schematic ULTRA-AIRE 100V Pictorial Electrical Diagram ULTRA-AIRE 100V Service Parts List QTYULTRA-AIRE 100V Optional Parts List 28 30 33 29 30 33 36ULTRA-AIRE 100V External Insulation KIT ULTRA-AIRE 100V Control Panel Installation ULTRA-AIRE 100V Dehumidifier Limited Warranty PO Box 8680 Madison, WI Phone 608-222-5301 Fax

Ultra-Aire 100V specifications

The Ultra-Aire 100V by Therma-Stor Products Group is a powerful and efficient ventilating dehumidifier designed to tackle excess moisture in residential spaces. Known for its compact design and advanced technology, the Ultra-Aire 100V is an ideal solution for basements, crawl spaces, and high humidity areas.

One of the main features of the Ultra-Aire 100V is its high extraction capacity. With the ability to remove up to 100 pints of moisture per day, it effectively manages humidity levels, helping to prevent mold growth, mildew, and structural damage. This unit is equipped with an energy-efficient compressor that ensures optimum performance while minimizing energy consumption, making it an environmentally friendly choice for homeowners.

In addition to its powerful dehumidification capabilities, the Ultra-Aire 100V incorporates innovative technologies for enhanced functionality. The unit is designed with a built-in digital humidity control system, allowing users to set their desired humidity level with precision. The humidity control automatically adjusts the unit's operation, ensuring consistent moisture levels throughout the home.

Another key characteristic of the Ultra-Aire 100V is its convenience in installation and operation. The unit can be ducted into existing HVAC systems or operated as a standalone unit, providing flexibility to fit various home configurations. Its compact size also makes it easy to install in tight spaces, such as crawl spaces and attics, without sacrificing performance.

For added convenience, the Ultra-Aire 100V features a user-friendly interface. The digital display provides clear visibility of the current humidity level and operational status, while the built-in timer allows for programming operational schedules. This means homeowners can set the dehumidifier to run during specific times, optimizing performance and energy usage.

Durability is another hallmark of the Ultra-Aire 100V. Constructed with high-quality materials, this unit is built to withstand the challenges of damp environments, ensuring long-lasting performance. Additionally, its advanced filtration system captures airborne particles, improving indoor air quality by removing allergens and dust.

In conclusion, the Therma-Stor Products Group Ultra-Aire 100V stands out as a reliable dehumidification solution. With its high extraction capacity, energy-efficient operation, user-friendly controls, and durable build, this dehumidifier is an excellent choice for homeowners seeking to maintain a healthy and comfortable indoor environment. Whether combating humidity in a basement or managing moisture in a crawl space, the Ultra-Aire 100V proves to be an indispensable tool for humidity control.