Therma-Stor Products Group Ultra-Aire 100V For Hvac Installer and Homeowner, 3B Setting

Page 13

FOR HVAC INSTALLER AND HOMEOWNER

8.Verify additional optional control operations such as fan interlock or lockout.

9.Proceed to operation/setting section.

FOR INSTALLER & HOMEOWNER:

5.3Operation 5.3A Display

•When there is power to the control, the control display will show the time, day, humidity, and temperature.

•When the control is turned on, the setpoint, fan status, auto/hold mode, and fresh air vent status is displayed.

•When a key is pressed the display will light.

•The “Time” and “Day” is displayed at the top of the screen.

•RH and Temperature are displayed in real time.

•An “O” before the set point, vent, or fan indicates the unit is operating the device.

•A flashing “O” before the set point, vent, or fan indicates the unit is in a delay prior to operating the device.

Note: Delay is an intentional factory installed time delay cycle that is meant to prevent short cycles, extending the life of the Ultra-Aire. If a delay is encountered, WAIT 10 MINUTES BEFORE EXPECTING NORMAL OPERATION.

5.3B Setting

During the set-up process, if you make a mistake, simply continue. You can always go back to adjust the settings. If you leave the control alone and don’t touch any buttons for 10 seconds, the control will remember any changes made and return to “home.”

5.3C On/Off Setting

Press the “ON/OFF” button to turn the system on or off. When the system is on, the setpoint, fan status, auto/hold mode, and fresh air vent status is displayed. In the off mode, the control will show the time, day, humidity, and temperature. When the unit is shipped, it is in manual mode.

5.3D Setting Clock Time

1.Press and hold the “CLOCK” button. The hour display will flash. Release the button.

2.Use the “UP/DOWN RH” buttons to change the value.

3.Press the “CLOCK” button again and the minute display will flash. Use the RH buttons to change the value.

4.Press the “CLOCK” button again and the “AM/PM” display will flash. Use the RH buttons to toggle the value.

5.Press the “CLOCK” button again and the day display will flash. Use the “RH” buttons to change the value.

If the “CLOCK” button is pressed again or no button is pressed for 5 seconds, the display will automatically return to “home.”

5.3E Setting Relative Humidity Setpoint

The relative humidity setpoint (the average RH that is maintained) operates the dehumidifier function of the Ultra- Aire. It has no effect on any other function of the unit. The control senses the ambient relative humidity of the space in which it is located.

13

Ultra-Aire 100V Installer’s & Owner’s Manual

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Fresh Air Ventilation DehumidificationAir Filtration Serial NoTable of Contents Safety Precautions Safety PrecautionsSpecifications For Hvac Installer onlyInstallation Intended Application for Ultra-Aire4C Ducting for Fresh Air Controls Quiet InstallationHumidity/Fan Control Panel Humidity Control Adjustment Ventilation Timer and Humidity Control PanelFan/Filter Switch Ventilation TimerHigh Efficiency Air filter DEH 3000 Digital Control 2B Wiring 2A Install InstructionsDEH 3000 Digital Control Installation Instructions 2D Dehumidifier lockout/activation AC sensor 2C Auxiliary relay operationDehumidification Engage A/C during dehumidification2E Location 2F Testing3B Setting For Hvac Installer and Homeowner3C On/Off Setting 3D Setting Clock Time3F Fan Setting and Operation For Hvac Installer only and HomeownerOperation 3H Intermittent or Programmed Ventilation 3J Default Settings 3I Temperature Cutout ProgrammingService MaintenanceCompressor/Capacitor Replacement Fan ReplacementRefrigerant Charging 6A Checking Compressor Motor Circuits6B Replacing a Burned Out Compressor Remote Controls6C Replacing a Compressor, Nonburn Out 7A Humidity ControlDefrost Thermostat 7B Programmable Ventilation TimerElectric Ventilation Damper ULTRA-AIR 100V Electrical Schematic ULTRA-AIRE 100V Pictorial Electrical Diagram QTY ULTRA-AIRE 100V Service Parts List28 30 33 29 30 33 36 ULTRA-AIRE 100V Optional Parts ListULTRA-AIRE 100V External Insulation KIT ULTRA-AIRE 100V Control Panel Installation ULTRA-AIRE 100V Dehumidifier Limited Warranty PO Box 8680 Madison, WI Phone 608-222-5301 Fax

Ultra-Aire 100V specifications

The Ultra-Aire 100V by Therma-Stor Products Group is a powerful and efficient ventilating dehumidifier designed to tackle excess moisture in residential spaces. Known for its compact design and advanced technology, the Ultra-Aire 100V is an ideal solution for basements, crawl spaces, and high humidity areas.

One of the main features of the Ultra-Aire 100V is its high extraction capacity. With the ability to remove up to 100 pints of moisture per day, it effectively manages humidity levels, helping to prevent mold growth, mildew, and structural damage. This unit is equipped with an energy-efficient compressor that ensures optimum performance while minimizing energy consumption, making it an environmentally friendly choice for homeowners.

In addition to its powerful dehumidification capabilities, the Ultra-Aire 100V incorporates innovative technologies for enhanced functionality. The unit is designed with a built-in digital humidity control system, allowing users to set their desired humidity level with precision. The humidity control automatically adjusts the unit's operation, ensuring consistent moisture levels throughout the home.

Another key characteristic of the Ultra-Aire 100V is its convenience in installation and operation. The unit can be ducted into existing HVAC systems or operated as a standalone unit, providing flexibility to fit various home configurations. Its compact size also makes it easy to install in tight spaces, such as crawl spaces and attics, without sacrificing performance.

For added convenience, the Ultra-Aire 100V features a user-friendly interface. The digital display provides clear visibility of the current humidity level and operational status, while the built-in timer allows for programming operational schedules. This means homeowners can set the dehumidifier to run during specific times, optimizing performance and energy usage.

Durability is another hallmark of the Ultra-Aire 100V. Constructed with high-quality materials, this unit is built to withstand the challenges of damp environments, ensuring long-lasting performance. Additionally, its advanced filtration system captures airborne particles, improving indoor air quality by removing allergens and dust.

In conclusion, the Therma-Stor Products Group Ultra-Aire 100V stands out as a reliable dehumidification solution. With its high extraction capacity, energy-efficient operation, user-friendly controls, and durable build, this dehumidifier is an excellent choice for homeowners seeking to maintain a healthy and comfortable indoor environment. Whether combating humidity in a basement or managing moisture in a crawl space, the Ultra-Aire 100V proves to be an indispensable tool for humidity control.
Top Page Image Contents