Therma-Stor Products Group DEH 3000R Damper Operation and Ventilation, Manual Hold Mode

Page 8

3.8Damper Operation and Ventilation, Manual (Hold) Mode

The “VENT” setting controls the ventilation function of the system. It has no control over the dehumidification function. In order to provide ventilation, the motorized damper must be open and the fan must be running. The controller takes care of these two functions automatically so that whenever the damper is open, the fan is running.

The ventilation indicator “O” will be displayed whenever the unit is ventilating. The fan operation indicator “O” will also be lit.

There are three damper operation modes:

1.“OPEN” – hold mode: The damper will be open and the dehumidifier fan will be continuously operating to introduce fresh air into the space. Use this mode for continuous fresh air ventilation. The fan is always on when the damper is open.

2.“CLOSED” – hold mode: The damper will never open, and the dehumidifier will not ventilate. The fan will still operate normally for recirculation and dehumidification.

3.“PROGRAMmed” mode: The DEH 3000R will operate the motorized damper and the dehumidifier fan according to the programmed ventilation schedule (Section 3.9).

The factory preset for the “VENT” setting is “CLOSED”.

To set “OPEN” – hold or “CLOSED” – hold ventilation operation:

1.Press the “VENT” button. The current setting will begin to flash on the display. Release the button.

2.Press the “VENT” button again to switch between “OPEN” and “CLOSED”.

3.Leave the control alone for 10 seconds and your settings will be saved.

3.9Damper Operation and Ventilation, Programmed Ventilation

This example shows the system in program mode (denoted by the schedule 15 minutes on, 5 minutes off and the word RUN in the lower right corner of the display).

The DEH 3000R will operate fresh air ventilation according to your ventilation program. The control needs to be programmed to turn the ventilation function ON and OFF at the desired intervals. This is done by programming the ventilation timer.

There are two programs available for ventilation:

1.Monday through Sunday

2.Monday through Friday & Saturday/Sunday

Each block of days has a morning schedule and a night schedule. Morning is the first 12 hours of the day and night is the second 12 hours.

Each schedule has:

•A “START” time when the ventilation schedule begins,

•An “OPEN FOR” duration for the amount of time the damper stays open in 5 minute intervals, from 0 to 60,

•And “CLOSED FOR” duration which closes the damper for a specified time in 5 minute intervals from 0 to 60.

Setting the Ventilation Program:

1.Press the “PROGRAM ENTER” button until the following menu appears:

2.Using the up/down “RH” buttons, highlight “PROGRAM” and select it by pressing the “PROGRAM enter” button. The following menu appears:

DEH 3000R Dehumidifier & Ventilation System Controller

8

Installation, Operation & Service Manual

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DEH 3000R Table of Contents Read and Save These Instructions SpecificationsInstallation Install InstructionsWiring Auxiliary relay operationCOM to no COM to NC Lock-out the A/C during dehumidificationSensor feature Dehumidifier lock-OFF or lock-ONTesting TroubleshootingFor Installer & Homeowner 3. Operation SettingPersonal Settings reference list Setting Clock TimeFan Setting and Operation To set the operationDamper Operation and Ventilation, Manual Hold Mode Temperature Cutout Programming Running the Ventilation ProgramInstall and Wiring Instructions Routing signal wiresSensor connection Sensor mountingDEH 3000R PO Box 8680 Madison, WI

DEH 3000R specifications

The Therma-Stor Products Group DEH 3000R is a powerful dehumidifier expertly designed to tackle moisture control in various environments. With its robust build and advanced features, the DEH 3000R caters to both commercial and residential applications, making it a versatile choice for reducing humidity levels effectively.

One of the standout features of the DEH 3000R is its high-efficiency operation. This model is equipped with an energy-efficient compressor that allows for effective moisture removal while minimizing energy consumption. As a result, users can enjoy a more cost-effective solution for maintaining optimal humidity levels, contributing to lower electricity bills. This dehumidifier is perfect for spaces such as basements, warehouses, and even job sites where moisture can lead to mold growth and structural damage.

The DEH 3000R employs advanced technologies such as its dual exhaust system, which enhances airflow and moisture removal efficiency. The unit features a built-in condensate pump that allows for continuous drainage, eliminating the need for manual emptying of water tanks. This is particularly beneficial in large spaces or during heavy moisture events, ensuring uninterrupted dehumidification.

Portability is another key characteristic of the DEH 3000R. The unit is designed with durable wheels, making it easy to transport from one location to another. This mobility ensures that the dehumidifier can be relocated as necessary to address moisture issues in different areas. Furthermore, the unit’s compact design does not compromise its performance, making it an ideal solution for any setting.

The control panel is user-friendly, featuring intuitive controls that allow for easy adjustment of settings and monitoring of humidity levels. With its adjustable humidity settings, users can customize operation to suit specific needs, ensuring optimal comfort and protection against moisture-related issues.

In summary, the Therma-Stor Products Group DEH 3000R stands out for its efficiency, advanced technologies, portability, and ease of use. It is a dependable choice for anyone seeking effective moisture control solutions in both commercial and residential settings, protecting properties from the damaging effects of high humidity.
Top Page Image Contents