Therma-Stor Products Group DEH 3000R For Installer & Homeowner 3. Operation, Display, Setting

Page 6

FOR INSTALLER & HOMEOWNER: 3. Operation

On the display screen, a solid “O” in front of any of the 3 functions (SETPOINT, VENT, FAN) indicates the function is operating. A flashing “O” indicates it is in a wait mode and not available at the moment. No “O” indicates the function is currently OFF.

Solid “O” before

Indicates

SETPOINT

Dehumidifier on

 

 

VENT

Fresh air ventilation cycle in progress

 

 

FAN

Fan on

 

 

Wait mode is a factory-programmed time period meant to prevent short cycles. This extends the life of the dehumidifier. When a flashing “O” is encountered, the unit is in wait mode and IT COULD BE UP TO 10 MINUTES BEFORE OPERATION

RESUMES.

3.1 Display

•Whenever there is power to the control, it will display the time, the day, % relative humidity, and temperature.

•When the control is actually switched ON, the %RH setpoint, fan status, run mode (program or hold), and fresh air ventilation status is displayed.

•When a key is pressed the display will light for approximately ½ a minute.

•The Time and Day is displayed at the top of the screen.

•RH and Temperature are displayed in real time.

•A solid “O” before the SET POINT, VENT, OR FAN indicates the function is operating.

•A flashing “O” before the SET POINT, VENT, OR FAN indicates the unit is in wait mode.

3.2 Setting

During the set-up process, if you make a mistake, simply continue. You can always go back to adjust the settings. If you leave the control alone and don’t touch any buttons for 10

seconds, the control will remember any changes made and return to the normal display screen, allowing you to proceed to the next step.

3.3 Personal Settings reference list

Please record your settings here.

Function

Factory setting

My Setting

 

 

 

SETPOINT (%RH)

50%

 

 

 

 

VENT

Closed

 

 

 

 

FAN

Auto

 

TEMP CUTOUT

99°

 

 

 

 

3.4 On/Off and display items

Press the “ON/OFF” button to turn the system ON or OFF.

When the system is ON, the setpoint, fan status, operation mode (RUN or HOLD), and fresh air vent status is displayed.

When the system is OFF, the control will display the time, day, %RH, and temperature.

When the unit is shipped, it is in manual (hold) mode.

3.5 Setting Clock Time

1.Press and hold the “CLOCK” button. The hour display will flash. Release the button.

2.Use the up/down “RH” buttons to change the value.

3.Press the “CLOCK” button again and the minute display will flash. Use the “RH” buttons to change the value.

4.Press the “CLOCK” button again and AM or PM will flash. Use the “RH” buttons to change the value.

DEH 3000R Dehumidifier & Ventilation System Controller

6

Installation, Operation & Service Manual

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DEH 3000R Installation Table of ContentsRead and Save These Instructions Specifications Install InstructionsCOM to no COM to NC WiringAuxiliary relay operation Lock-out the A/C during dehumidificationSensor feature Dehumidifier lock-OFF or lock-ONTesting TroubleshootingPersonal Settings reference list For Installer & Homeowner 3. OperationSetting Setting Clock TimeFan Setting and Operation To set the operationDamper Operation and Ventilation, Manual Hold Mode Temperature Cutout Programming Running the Ventilation ProgramSensor connection Install and Wiring InstructionsRouting signal wires Sensor mountingDEH 3000R PO Box 8680 Madison, WI

DEH 3000R specifications

The Therma-Stor Products Group DEH 3000R is a powerful dehumidifier expertly designed to tackle moisture control in various environments. With its robust build and advanced features, the DEH 3000R caters to both commercial and residential applications, making it a versatile choice for reducing humidity levels effectively.

One of the standout features of the DEH 3000R is its high-efficiency operation. This model is equipped with an energy-efficient compressor that allows for effective moisture removal while minimizing energy consumption. As a result, users can enjoy a more cost-effective solution for maintaining optimal humidity levels, contributing to lower electricity bills. This dehumidifier is perfect for spaces such as basements, warehouses, and even job sites where moisture can lead to mold growth and structural damage.

The DEH 3000R employs advanced technologies such as its dual exhaust system, which enhances airflow and moisture removal efficiency. The unit features a built-in condensate pump that allows for continuous drainage, eliminating the need for manual emptying of water tanks. This is particularly beneficial in large spaces or during heavy moisture events, ensuring uninterrupted dehumidification.

Portability is another key characteristic of the DEH 3000R. The unit is designed with durable wheels, making it easy to transport from one location to another. This mobility ensures that the dehumidifier can be relocated as necessary to address moisture issues in different areas. Furthermore, the unit’s compact design does not compromise its performance, making it an ideal solution for any setting.

The control panel is user-friendly, featuring intuitive controls that allow for easy adjustment of settings and monitoring of humidity levels. With its adjustable humidity settings, users can customize operation to suit specific needs, ensuring optimal comfort and protection against moisture-related issues.

In summary, the Therma-Stor Products Group DEH 3000R stands out for its efficiency, advanced technologies, portability, and ease of use. It is a dependable choice for anyone seeking effective moisture control solutions in both commercial and residential settings, protecting properties from the damaging effects of high humidity.
Top Page Image Contents