CHAPT ER
Send documentation comments to mdsfeedback-doc@cisco.com.
2-1
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
2
Installing the Cisco MDS 9216 Switch
This chapter describes how to install the CiscoMDS 9216 Switch and its
components, and includes the following information:
•Pre-Installation, page 2-2
•Installing the Chassis in the Rack, page 2-7
•Grounding the Chassis, page2-15
•Starting Up the Switch, page2-17
•Removing and Installing Components, page2-21
Note Before you install, operate, or service the system, read the Regulatory
Compliance and Safety Information for the Cisco MDS 9000 Family for important
safety information.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS