Send documentation comments to mdsfeedback-doc@cisco.com.
Chapter2 Installing the Cisco MDS 9216 Switch
Installing the Chassis in the Rack
2-8
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Note If you do not find all the parts listed in Table 2- 1, you may have an older version
of the rack mount kit, which only had the L brackets. If this is the case, you can
either install the switch in the rack with just the L brackets, or contact your
customer service representative for a current version of the rack mount kit.
Note If you purchased this product through a Cisco reseller, contact the reseller directly
for technical support. If you purchased this product directly from Cisco, contact
Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
Table2-1 Cisco MDS 9216 Rack-Mount Kit Checklist
Quantity Part Description Received
L bracket kit
2 L brackets
12 M4 x 6mm Phillips countersunk screws
Cable guide kit
2 Cable guide
6 12-24 x 3/4-inch Phillips binder-head screws
6 10-32 x 3/4-inch Phillips binder-head screws
Rack mounting bracket kit
2 Slider rails
2C brackets
6 12-24 x 3/4-inch Phillips binder-head screws
6 10-32 x 3/4-inch Phillips binder-head screws
4 M4 x 6mm, Phillips countersunk screws