Appendix C Cable and Port Specifications
SFP Transceiver Specifications
Send documentation comments to mdsfeedback-doc@cisco.com.
Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers
Table
Table
SFP Transceivers
Parameter | Symbol | Min. | Max. | Unit | Notes |
|
|
|
|
|
|
Storage Temperature | TS | 100 | °C | See note 1. | |
Case Temperature | TC | 0 | 85 | °C | See notes 1, 2. |
Relative Humidity | RH | 5 | 95 | % | See note 1. |
|
|
|
|
|
|
Module Supply Voltage | VCCT,R | 3.1 | 3.5 | V | See note 1. |
Notes:
1.Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short period of time. See Reliability Data Sheet for specific reliability performance.
2.Between Absolute Maximum Ratings and the Recommended Operating Conditions functional performance is not intended, device reliability is not implied, and damage to the device may occur over an extended period of time.
Cisco CWDM SFP Transceivers
Table
Table
|
|
| Description |
| Color | |
|
|
|
|
|
| |
|
|
| Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1Gbps/2Gbps FC |
| Gray | |
|
|
|
|
|
| |
|
|
| Cisco CWDM SFP 1490 nm; Gigabit Ethernet and 1Gbps/2Gbps FC |
| Violet | |
|
|
|
|
|
| |
|
|
| Cisco CWDM SFP 1510 nm; Gigabit Ethernet and 1Gbps/2Gbps FC |
| Blue | |
|
|
|
|
|
| |
|
|
| Cisco CWDM SFP 1530 nm; Gigabit Ethernet and 1Gbps/2Gbps FC |
| Green | |
|
|
|
|
|
| |
|
|
| Cisco CWDM SFP 1550 nm; Gigabit Ethernet and 1Gbps/2Gbps FC |
| Yellow | |
|
|
|
|
|
|
|
|
| Cisco MDS 9216 Switch Hardware Installation Guide |
|
|
| |
|
|
|
|
| ||
|
|
|
| |||
|
|
|
| |||
