Chapter 1 Product Overview

Supported SFP Transceivers

Send documentation comments to mdsfeedback-doc@cisco.com.

Cisco’s Fibre Channel SFP transceivers have LC connectors and comply with 1 Gbps / 2 Gbps Fibre Channel standards as defined in FC-PI 10.0 2.

Transmission ranges for 2 Gbps are as follows:

Long wavelength: Up to 10 km on 9 micron single mode fiber

Short wavelength: Up to 300 m on 50 micron multi-mode fiber

Short wavelength: Up to 150 m on 62.5 micron multi-mode fiber

For detailed transceiver specifications, see Appendix C, “Cable and Port

Specifications”.

Combination Fibre Channel/Gigabit Ethernet SFP Transceivers

Cisco’s Combination Fibre Channel/Gigabit Ethernet SFP transceivers are available in short wavelength (SWL) or long wavelength (LWL) versions. Both of these versions are 1 Gbps / 2 Gbps capable.

Cisco’s Combination SFP transceivers have LC connectors and comply with 1 Gbps / 2 Gbps Fibre Channel as defined in FC-PI 10.0 2.

Transmission ranges are as follows:

Long wavelength: Up to 10 km on 9 micron single mode fiber

Short wavelength: Up to 300 m on 50 micron multi-mode fiber

Short wavelength: Up to 150 m on 62.5 micron multi-mode fiber

For detailed transceiver specifications, see Appendix C, “Cable and Port

Specifications”.

CWDM Combination Fibre Channel / Gigabit Ethernet SFP Transceivers

All Fibre Channel and Gigabit Ethernet ports in the Cisco MDS 9216 support CWDM SFP transceivers.

The Cisco CWDM SFP transceivers have LC connectors and support both Gigabit Ethernet and Fibre Channel (1 Gbps / 2 Gbps). They match the wavelength plan of Cisco CWDM GBICs and Cisco CWDM OADMs.

 

Cisco MDS 9216 Switch Hardware Installation Guide

1-22

78-16165-01

Page 48
Image 48
Cisco Systems 9216 manual Combination Fibre Channel/Gigabit Ethernet SFP Transceivers