Cisco Systems 9216 manual Cisco Gigabit Ethernet / Fibre Channel Transceivers

Appendix C Cable and Port Specifications

SFP Transceiver Specifications

Send documentation comments to mdsfeedback-doc@cisco.com.

Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers

Table C-9provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP transceivers.

Table C-9 Maximum Environmental and Electrical Ratings for Cisco Fibre

Channel SFP Transceivers

Parameter	Symbol	Min.	Max.	Unit	Notes
Storage Temperature	TS	-40	85	°C	See note 1.
Case Temperature	TC	0	70	°C	See notes 1, 2.
Relative Humidity	RH	5	95	%	See note 1.
Module Supply Voltage	VCCT,R	3.1	3.5	V	See note 1.

Notes:

1.Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short period of time. See Reliability Data Sheet for specific reliability performance.

2.Between Absolute Maximum Ratings and the Recommended Operating Conditions functional performance is not intended, device reliability is not implied, and damage to the device may occur over an extended period of time.

Cisco Gigabit Ethernet / Fibre Channel Transceivers

Table C-10lists the combination Gigabit Ethernet / Fibre Channel (GE/FC) SFP transceivers available through Cisco.

Table C-10 Cisco Gigabit Ethernet / Fibre Channel SFP Transceivers

Description	Type
1 Gbps Ethernet and 1 Gbps/2 Gbps Fibre Channel-SW SFP, LC	Short wavelength
1 Gbps Ethernet and 1 Gbps/2 Gbps Fibre Channel-LW SFP, LC	Long wavelength

	Cisco MDS 9216 Switch Hardware Installation Guide
C-10	78-16165-01