Therma-Stor Products Group DEH 3000R owner manual Temperature Cutout Programming

Page 9

You can select from:

“MON-FRI” “SAT-SUN” for separate weekday and weekend schedules, or “MON-SUN” which gives you equal weekday and weekend schedules.

3.Using the Up/Down “RH” buttons, highlight and then select one of the two choices. The example given shows how to program separate weekday and weekend schedules. The same method is used if you choose the other program.

Example: menu when you select “MON-FRI” “SAT-SUN”:

1.Enter the starting time for weekdays using the up/down “RH” buttons to change the time.

2.Press the “PROGRAM enter” button to switch to the “OPEN FOR” setting. Using the up/down “RH” buttons, change the duration that the damper will ventilate fresh air.

3.Press the “PROGRAM ENTER” button to switch to the “CLOSED FOR” setting. Using the up/down “RH” buttons, change the duration that the damper will remain closed between ventilation cycles.

For the example given, starting at 8:00AM in the morning, the control will ventilate fresh air for 15 minutes then stop for 15 minutes. This schedule of 15 minutes open, 15 minutes closed will continue until the start time of the night schedule.

Morning schedule is available anytime from 12:00AM until 11:59AM.

Night schedule is available anytime from 12:00PM until 11:59PM.

4.Press “PROGRAM ENTER” again to go to the “MON-FRI” night schedule. Repeat the steps listed above for this and the “SAT-SUN” day and night schedules.

When you have finished programming your schedule (either the

7-day version or the weekday/weekend split version), use the down “RH” button to highlight the EXIT option and then press “PROGRAM ENTER” to select it.

Running the Ventilation Program

Press and hold the “PROGRAM ENTER” button until the “PROGRAM” screen appears.

Use the down “RH” button to highlight “RUN PROGRAM”:

Then press “PROGRAM ENTER” to select it. The display will appear as follows:

4.0 Temperature Cutout Programming

Dehumidifiers produce heat when dehumidifying and depending upon outside conditions, the ventilation function may also introduce warm air. Some conditions may introduce enough heat to drive household temperatures up. The DEH 3000R temperature cutout feature disables all Ultra-Aire operations if household temperatures reach the cutout setpoint.

In most installations this feature will not need to be used (the cutout is factory set to 99°F). If a lower temperature cutout is desired, program the setpoint by pressing and holding the “PROGRAM ENTER” button until the “PROGRAM” screen appears. Press the up/down “RH” buttons until “TEMP CUTOUT” highlighted. Then press the “PROGRAM ENTER” button again to select it. Now use the “RH” up or “RH” down buttons to adjust the setpoint. Press “PROGRAM ENTER” to return to the home screen.

DEH 3000R Dehumidifier & Ventilation System Controller

9

Installation, Operation & Service Manual

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DEH 3000R Read and Save These Instructions Specifications Table of ContentsInstallation Install InstructionsAuxiliary relay operation WiringCOM to no COM to NC Lock-out the A/C during dehumidificationDehumidifier lock-OFF or lock-ON Sensor featureTroubleshooting TestingSetting For Installer & Homeowner 3. OperationPersonal Settings reference list Setting Clock TimeTo set the operation Fan Setting and OperationDamper Operation and Ventilation, Manual Hold Mode Running the Ventilation Program Temperature Cutout ProgrammingRouting signal wires Install and Wiring InstructionsSensor connection Sensor mountingDEH 3000R PO Box 8680 Madison, WI

DEH 3000R specifications

The Therma-Stor Products Group DEH 3000R is a powerful dehumidifier expertly designed to tackle moisture control in various environments. With its robust build and advanced features, the DEH 3000R caters to both commercial and residential applications, making it a versatile choice for reducing humidity levels effectively.

One of the standout features of the DEH 3000R is its high-efficiency operation. This model is equipped with an energy-efficient compressor that allows for effective moisture removal while minimizing energy consumption. As a result, users can enjoy a more cost-effective solution for maintaining optimal humidity levels, contributing to lower electricity bills. This dehumidifier is perfect for spaces such as basements, warehouses, and even job sites where moisture can lead to mold growth and structural damage.

The DEH 3000R employs advanced technologies such as its dual exhaust system, which enhances airflow and moisture removal efficiency. The unit features a built-in condensate pump that allows for continuous drainage, eliminating the need for manual emptying of water tanks. This is particularly beneficial in large spaces or during heavy moisture events, ensuring uninterrupted dehumidification.

Portability is another key characteristic of the DEH 3000R. The unit is designed with durable wheels, making it easy to transport from one location to another. This mobility ensures that the dehumidifier can be relocated as necessary to address moisture issues in different areas. Furthermore, the unit’s compact design does not compromise its performance, making it an ideal solution for any setting.

The control panel is user-friendly, featuring intuitive controls that allow for easy adjustment of settings and monitoring of humidity levels. With its adjustable humidity settings, users can customize operation to suit specific needs, ensuring optimal comfort and protection against moisture-related issues.

In summary, the Therma-Stor Products Group DEH 3000R stands out for its efficiency, advanced technologies, portability, and ease of use. It is a dependable choice for anyone seeking effective moisture control solutions in both commercial and residential settings, protecting properties from the damaging effects of high humidity.
Top Page Image Contents