Adjustable END Caps & Filler Pieces

–Adjustable End Caps are available in both left-hand and right-hand patterns and are used in the same loca- tions as the standard end caps except the 9” length of the adjustable end caps makes it possible to ¿ll in spaces of up to 7-1/2”. A knockout is also available in the ends for piping.

Filler pieces are used where a 9” space or less exists between two sections of baseboard or between a section of baseboard and baseboard extension.

To install adjustable end cap or ¿ller piece accessory, insert bolt thru hole in accessory and engage toggle as shown below. Place accessory against BASE-RAY®at same time pushing toggle thru air outlet of BASE-RAY. With accessory in ¿nal location, tighten bolt until accessory is secure. Use ¿nger to keep toggle in vertical position, as shown below.

10. Completing Installation – Important

AIR-SEAL – It is necessary to prevent leakage of air between the walls and BASE-RAY®, since this will cause dirt streaks on the wall above the heating unit. This can be avoided by installing an “Air-Seal”.

We recommended using 1” wide tape for this purpose, preferably with a thermal setting adhesive, available from Burnham at nominal charge.

With the adhesive side down, press one-half of tape against the top of BASE-RAY and the other half against the wall as illustrated on page 9.

WOOD MOULDING – For ¿nished installation, 3/4” quarter round or other wood moulding should be nailed to wall on top of BASE-RAY (over “Air-Seal”) and Trim and down side of Valve Enclosures. When Projecting Corner Plates are used, install wood moulding at base of Corner Plate to hold in place. An illustration showing the application of the moulding can be found on page 9.

PAINTING – BASE-RAY and Trim are primed with a latex (water based) paint and must be top coated with a high grade oil or solvent based enamel to prevent rusting of the metals immediately after installation. Primer coated products should not be allowed to sweat as a result of high room humidity or cold water in system. The use of Àat wall paint is not recommended since it may chip or crack when applied to surfaces that are heated. Consult reputable paint dealer.

PROPER LOCATION OF TOGGLE

WHEN SECURING ACCESSORY TO BASE-RAY

INSTALLATION OF BASE-RAY

ADJUSTABLE END CAP & FILLER PIECE

81441001R8-3/06 specifications

The Burnham 81441001R8-3/06 is a state-of-the-art boiler designed to provide efficiency and reliability for residential and commercial heating systems. This model stands out due to its commitment to innovation and advanced engineering, making it a top choice for those seeking optimal heating performance.

One of the primary features of the Burnham 81441001R8-3/06 is its high efficiency rating. It is designed to convert fuel into heat with minimal wastage, ensuring that users receive more heat per unit of fuel consumed. This efficiency translates into lower operating costs and a reduced environmental footprint, making it an eco-friendly alternative in the world of heating solutions.

In terms of technology, the Burnham 81441001R8-3/06 is equipped with a robust, cast-iron heat exchanger. This component is crucial for transferring heat effectively while maintaining durability over time. Cast iron is known for its excellent heat retention properties and ability to withstand extreme temperatures, ensuring a longer lifespan for the boiler.

The model also features a user-friendly digital control system that allows for easy operation and monitoring. Homeowners can adjust settings, check system performance, and receive alerts when maintenance is required, leading to prolonged efficiency and safety. The boiler’s compatibility with smart home systems enhances convenience, allowing users to manage heating remotely via smartphones or tablets.

Another characteristic of the Burnham 81441001R8-3/06 is its compact design. This feature makes it ideal for installations in tight spaces without compromising on performance. The unit can fit comfortably in basements, utility rooms, or other restricted areas while delivering powerful heating service.

Moreover, safety is a top priority in the design of the Burnham 81441001R8-3/06. It includes multiple safety features such as pressure relief valves and electronic ignition systems that reduce the risk of accidents. These measures provide peace of mind for homeowners and ensure that the boiler operates safely throughout its lifespan.

In conclusion, the Burnham 81441001R8-3/06 boiler combines high efficiency, durable construction, advanced technology, and safety features, making it a leading choice for those in the market for reliable heating solutions. Whether for residential or commercial applications, it effectively meets the diverse heating needs of users, providing comfort and efficiency for years to come.