Burnham 81441001R8-3/06 installation instructions 2000 LBS./HR. Four G.P.M. Flow Rate

For Ratings at the following temperatures, multiply the 150° rating by the multiplier of the desired temperature. Temperature – Multiplier

150°	-	1.0	120°	-	.54
		130° - .68
140°	-		110°	-	.42
		.82

No. 9A Base-Ray®I=B=R Ratings – Steam and Hot Water (2000 LBS/HR Flow Rate **)

	Steam	Steam		HOT WATER RATINGS IN BTU PER HOUR AT							Pressure
Length in		Rating		2000 LBS./HR. (FOUR G.P.M.) FLOW RATE**							Drop in
	Rating
Lineal Feet*		B.T.U. Per		AT AVERAGE WAER TEMPERATURE OF							Inches of
	Square Feet
		Hr. At 215°F	230°F	220°F	210°F	200°F	190°F	180°F	170°F	150°F	Water***
Per Lin. Ft.	3.40	820	940	880	810	750	690	620	550	410
1.5	5.1	1230	1410	1320	1220	1130	1040	930	830	615	1.29
2.0	6.8	1640	1880	1760	1620	1500	1380	1240	1100	820	1.39
2.5	8.5	2050	2350	2200	2030	1880	1730	1550	1380	1025	1.50
3.0	10.2	2460	2820	2640	2430	2250	2070	1860	1650	1230	1.61
3.5	11.9	2870	3290	3080	2840	2630	2420	2170	1930	1435	1.71
4.0	13.6	3280	3760	3520	3240	3000	2760	2480	2200	1640	1.82
4.5	15.3	3690	4230	3960	3650	3380	3110	2790	2480	1845	1.93
5.0	17.0	4100	4700	4400	4050	3750	3450	3100	2750	2050	2.03
5.5	18.7	4510	5170	4840	4460	4130	3800	3410	3030	2255	2.14
6.0	20.4	4920	5640	5280	4860	4500	4140	3720	3300	2460	2.25
6.5	22.1	5330	6110	5720	5270	4880	4490	4030	3580	2665	2.35
7.0	23.8	5740	6580	6160	5670	5250	4830	4340	3850	2870	2.46
7.5	25.5	6150	7050	6600	6080	5630	5180	4650	4130	3075	2.57
8.0	27.2	6560	7520	7040	6480	6000	5520	4960	4400	3280	2.68
8.5	28.9	6970	7990	7480	6890	6380	5870	5270	4680	3485	2.78
9.0	30.6	7380	8460	7920	7290	6750	6210	5580	4950	3690	2.89
9.5	32.3	7790	8930	8360	7700	7130	6560	5890	5230	3895	3.00
10.0	34.0	8200	9400	8800	8100	7500	6900	6200	5500	4100	3.10
10.5	35.7	8610	9870	9240	8510	7880	7250	6510	5780	4305	3.21
11.0	37.4	9020	10340	9680	8910	8250	7590	6820	6050	4510	3.32
11.5	39.1	9430	10810	10120	9320	8630	7940	7130	6330	4715	3.42
12.0	40.8	9840	11280	10560	9720	9000	8280	7440	6600	4920	3.53
12.5	42.5	10250	11750	11000	10130	9380	8630	7750	6880	5125	3.64
13.0	44.2	10660	12220	11440	15030	9750	8970	8060	7150	5330	3.74
13.5	45.9	11070	12690	11880	10940	10130	9320	8370	7430	5535	3.85
14.0	47.6	11480	13160	12320	11340	10500	9660	8680	7700	5740	3.96
14.5	49.3	11890	13630	12760	11750	10880	10010	8990	7960	5945	4.06
15.0	51.0	12300	14100	13200	12150	11250	10350	9300	8250	6150	4.17
15.5	52.7	12710	14570	13640	12560	11630	10700	9610	8530	6355	4.28
16.0	54.4	13120	15040	14080	12960	12000	11040	9920	8800	6560	4.38
16.5	56.1	13530	15510	14520	13370	12380	11390	10230	9080	6765	4.49
17.0	57.8	13940	15980	14960	13770	12750	11730	10540	9350	6970	4.60
17.5	59.5	14350	16450	15400	14180	13130	12080	10850	9630	7175	4.70
18.0	61.2	14760	16920	15840	14580	13500	12420	11160	9900	7380	4.81
18.5	62.9	15170	17390	16280	14990	13880	12770	11470	10180	7585	4.92
19.0	64.6	15580	17860	16720	15390	14250	13110	11780	10450	7790	5.03
19.5	66.3	15990	18330	17160	15800	14630	13460	12090	10730	7995	5.13
20.0	68.0	16400	18800	17600	16200	15000	13800	12400	11000	8200	5.24
20.5	69.7	16810	19270	18040	16610	15380	14150	12710	11280	8405	5.35
21.0	71.4	17220	19740	18480	17010	15750	14490	13020	11550	8610	5.45
21.5	73.1	17630	20210	18920	17420	16130	14840	13330	11830	8815	5.56
22.0	74.8	18040	20680	19360	17820	16500	15180	13640	12100	9020	5.67

I=B=R Ratings are determined from tests made in accordance with the I=B=R Testing and Rating Code for Baseboard Type of Radiation, including an allowance of 15% for heating effect permitted by the Code.

Ratings based on active length. Active length same as total length.

**The Hot Water Ratings at 2000 lb. Flow Rate are limited to installations where the water flow rate through the Base-Ray is greater than 2000 lbs. per hour (four gallons per minute). Where the water flow rate through the Base-Ray is not known, the rating at the standard flow rate of 500 lbs. per hour must be used.

*Add ½" to length for each bushing. Add 5" to length for each valve enclosure.

***Based on ¾" pipe connections.

9A Base-Ray Water Content - 2.5 lbs. or .3 gal. per linear ft.

3