Heat & Glo LifeStyle 6000GLX-IPILP-S/-R Doors, Finish Door FIT Material See Maximum Thickness

C. Doors

Only doors certified for use with this appliance model may be used. Contact your dealer for a list of doors that may be used. Once you have determined what kind of door and finishing material is going to be used on the fireplace, you may use the table below which shows the door mod- els and the finishing material thickness allowed. For an inside fit there is an available template to assist with siz- ing the finishing material.

		FINISH
DOOR	FIT	MATERIAL	SEE
		MAXIMUM	FIGURE
		THICKNESS
Folio	Inside	Any	13.4
Arcadia	Overlap	1 inch	13.5
	Inside	Any	13.6
Halston	Overlap	1 inch	13.5
	Inside	1 inch - 2 inch	13.7
Chateau	Overlap	1 inch	13.5
	Inside	Any	13.6
Valencia	Overlap	1 inch	13.5
	Inside	Any	13.6
Galleria	Overlap	1 inch	13.5
	Inside	1 inch - 2 inch	13.7

	ELBOW
FINISHING	HEAT	FINISHING
MATERIAL	SHIELD	MATERIAL

DOOR

37 in.

(Outside door width)

37-1/4 in.

(Includes 1/8 in. opening each side of door)

33-3/4 in.	34 in.
37 in.
(Outside door width)
37-1/4 in.

(Includes 1/8 in. opening each side of door)

Finishing materials over 1 inch thick.

Figure 13.6 Inside fit door

ELBOW

HEAT

SHIELD

Stop finishing material flush with opening.

Figure 13.4 Folio Door

Finishing materials 1 inch maximum thick. Stop finishing material flush with opening.

Figure 13.5 Overlap Fit Door

1-2 IN. THICK	1-2 IN. THICK
FINISHING	FINISHING
MATERIAL	MATERIAL

*IF FINISHING MATERIAL IS THICKER THAN

2 IN., DOORS WILL ONLY OPEN

AS FAR AS PICTURED

DOORS

33 3/4	34 IN.
IN.

37 1/4 IN.

Finishing material between 1 and 2 inches thick.

Figure 13.7 Operable hinge door

Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. Q • 11/08 51