Troubleshooting
Note
❒Slide the cutter one way only, otherwise paper waste may pile up inside the machine.
D Rotate the paper roll in the direction of the arrow until you can see the edge of the paper.
E Turn the knob anticlockwise about 1/4 to adjust the paper position.
5
F Slowly rotate the paper roll until the edge of the paper is fed into the rub- ber part of the roller(A). While feeding the flap of the paper roll into the rubber part of the roller, turn the paper knob clockwise(B).
Note
❒Do not hold the paper knob from side. It may cause you touching a sticky oil. For how to turn the knob without any harm, see the illustration below:
66
