Basic Copying (Copying to sheets)
Using the Roll Feeder (Option)
A When the Wait indicator goes off and the Ready and the Set Paper indicator go on, the copier enters the ready condition.
2
Make sure that the paper feed indicator lights up.
B Select any copy settings you require, such as the media type or copy densi- ty.
Press the {RF Select/Cut} key to select the Roll Feeder.
Note
❒If you select two roll feeder (option), select one of the roll.
C Press the {Paper Feed} key.
D Open the guides to keep the edge of the original from slipping into the pa- per entrance.
15
