3. Copy Settings
Copying Onto Other Media
To copy onto translucent or tracing paper or film, use the {Copy Media} key to match the paper type refer to the following table.
Type of paper | Media setting |
|
|
Plain paper | Both indicators off |
|
|
Film | Film indicator on |
|
|
Translucent paper | Translucent indicator on |
|
|
Heavy paper | Translucent indicator on |
|
|
Thin paper | No indicator or the film indicator if necessary. |
|
|
If you are not sure of what type of paper you have, check the label on the paper package to confirm it.
A Press the {Copy Media} key to turn on the Translucent or Film indicator.
The Wait indicator goes on and either the Translucent or Film indicator lights.
B When the wait indicator goes off and the Ready and the Set Paper indicator go on, the copier enters the ready condition.
Note
❒Even if you have set the Copy Media function correctly, creasing might oc- cur depending on the temperature or humidity. If this happens, adjust the fusing temperature manually. See the next page.
27
