Settings You Can Change with User Tools
❒Default: 0
•Beeper On/Off(+05): The beeper can be turned off completely; turned off for setting the margin, multiple copies, and paper length; or left on to emit a tone whenever a key is pressed.
Note
❒0: On, 1: All Off, 2: Partially Off
❒Default: 2(The beeper does not work if you use leading edge margin.)
•Paper Feed Out Waiting Time Setting(+06): When the copier is ready to re- ceive the original, it will wait for a preset length of time. If no original is set
within this time, the copier will process the copy paper without copying. The |
| |
3 | ||
time can be set to 1, 2, 3, 4, or 5 minutes. | ||
|
Note
❒0: 2min, 1: 1min, 2: 3min, 3: 4min, 4: 5 min
❒Default: 0
•Manual Feed Start Time Setting(+07): After the copy paper is set, the copier waits for a preset number of seconds before starting the rollers that will pull the paper in. This pause gives you a chance to align the paper. The time can be set to 0.7, 1, 2, 3, 4, or 5 seconds.
Note
❒0: 2.0sec, 1: 0.7sec, 2: 1.0sec, 3: 3.0sec, 4: 4.0sec, 5: 5.0sec
❒Default: 0
•Lead Edge Increase/Decrease Speed Setting(+08): The speed at which the lead edge setting scrolls up or down can be changed. The time for one incre- ment (or decrement) can be set to 0.02, 0.05, 0.10, 0.25, or 0.5 seconds.
Note
❒0: 0.10 sec, 1: 0.50 sec, 2: 0.25 sec, 3: 0.05 sec, 4: 0.02 sec
❒Default: 0
•Auto Reset Time Setting(+09): If the copier is idle for a while, it will clear it- self. The time needed can be set to 1, 2, 3, 4, or 5 minutes. This function can also be turned off.
Note
❒0: 2 min, 1: 1min, 2: 3 min, 3: 4 min, 4: 5 min, 5: None
❒Default: 0
❒The machine cannot enter the Auto reset mode if the roll end indicator lights while copying repeatedly.
❒The machine cannot enter the Auto clear if the toner end indicator lights.
41
