Heat & Glo LifeStyle Montana-36, Montana-42 Troubleshooting, Diagnostics and Problem Solving

Page 29

10 Troubleshooting

Diagnostics and Problem Solving

I can’t get a good fire going. What am I doing wrong?

Diagnostic Questions

Possible Causes of Condition

Solutions

Is the damper open?

• No draft

Open damper.

 

 

 

 

Is there enough paper/starter?

Insufficient heat to ignite kindling

Use more paper/starter.

 

 

 

 

Is there enough kindling?

Insufficient heat to ignite fuel

Use more dry kindling.

Is the kindling dry?

 

 

 

 

 

 

Is there enough or too much

• Insufficient heat to establish draft

Use small split wood that is well seasoned (split, covered on

wood? Is it too large? Is it dry

 

 

top at least 6 months, preferably a year).

Insufficient air passage

enough?

 

 

 

 

Insufficient surface area

 

 

 

 

• Ignition temperature high due to moisture

 

 

 

 

Are there adequate air spaces

• Insufficient combustion air and exposed

Arrange kindling and wood for air movement.

between fuel pieces?

 

surface area

 

 

 

 

Is the chimney pre-warmed?

• Exposed, cold chimney down drafting

Use lighted rolled newspaper at throat or flue opening to

 

 

 

start upward movement.

 

 

 

Does the kindling, wood not

• Condition, amount, arrangement of kindling

Use more, drier, well-spaced kindling and fuel.

ignite?

 

and fuel

 

 

 

 

Does the kindling ignite, but the

• Amount of kindling

Use more kindling; use smaller, dry wood.

fuel doesn’t?

Condition of fuel

 

 

 

 

 

 

Does the fuel ignite, but not burn

• Condition of fuel

Use well-seasoned wood and sufficient amount; turn

well?

• Draft problem

exhaust fans off; open window slightly. Perform Simplified

 

House Pressure Test.

 

 

 

 

 

 

 

I don’t get enough/any heat from the fireplace. What can I do about it?

Diagnostic Questions

Possible Causes of Condition

Solutions

 

How much wood is used for fire?

• Insufficient fuel

Make larger fires.

 

 

 

 

How well seasoned is the wood?

• Condition of fuel

Burn seasoned wood: covered on top, split and stacked for

 

 

9 months to 2 years.

 

 

 

 

How much heat output do you

• Unrealistic expectations

Explanation of decorative nature of fireplace; suggestion of

expect?

 

approved fireplace insert.

 

 

 

 

The fireplace burns the wood too fast. What can I do?

Diagnostic Questions

Possible Causes of Condition

Solutions

 

Do you have glass doors?

Need to slow air intake

Add glass doors.

 

 

 

 

 

What is the condition of the

Extremely dry wood

Mix in less seasoned wood after fire established.

wood?

 

 

 

 

 

 

 

 

 

Heat & Glo LifeStyles Collection • Montana • 4039-150 Rev I • 08/06

29

Image 29
Contents Fire Risk Models Montana-36 Montana-42 Woodburning FireplaceNumber Listing Label Information/LocationGrate Table of Contents Not intended for use as a primary heat source Listing and Code ApprovalsAppliance Certification Moisture Resistance Design and Installation ConsiderationsGetting Started Typical Fireplace System Typical Fireplace SystemFire Risk Explosion Risk Tools and Supplies NeededInspect Fireplace and Components Framing and Clearances Freestanding Installations see FigureSelecting Fireplace Location Exterior Walls see FigureFreestanding Installation Clearances to Combustible Materials ClearancesFrame the Fireplace Sidewalls/SurroundsChimney Requirements Fire Risk Sharp Edges Asphyxiation Risk Installation of FireplaceInstall the Dual Cooling Air Kit Position the Fireplace Secure the FireplaceHeight of Chimney Components Chimney Assembly¨ Table Using Offsets/ReturnsAssemble the Chimney Sections Install the Ceiling FirestopsSecure the Chimney Install the Attic Insulation ShieldDouble-check the Chimney Assembly Chimney Termination Complete the EnclosureChase Top Install the Termination CapInstalling an ST1175 Square Termination Cap Gas Code, Ansi Z223.1 AccessoriesGas Log/Lighter Provisions Hearth Extension Insulation Alternatives, R Value = FinishingHearth Extension Glass Doors Finishing MaterialMantel General Information Operating InstructionsClear Space Near the Fireplace Outside AirFlue Damper FirescreenWood Fuel GrateStarting a Fire Diagnostics and Problem Solving TroubleshootingChimney Inspection/Cleaning Maintenance and Servicing the FireplaceDisposal of Ashes Firebox RefractoryWhen cleaning glass door Maintenance Task ListClean Chimney FireReference Materials Fireplace DimensionsDescription Fireplace ComponentsCatalog # Chimney Components432 mm 13-3/8 340 mm 51 mm Woodburning Termination Cap Montana Series Service PartsHerringbone refractory available post week 3/04 Description of PartThis page intentionally left blank This page intentionally left blank This page intentionally left blank Limited Warranty Warranty For Heat & GLO FireplacesContact Information

Montana-42, Montana-36 specifications

The Heat & Glo LifeStyle Montana-42 and Montana-36 gas fireplaces represent a notable fusion of modern design and advanced technology, catering to homeowners seeking both functionality and aesthetic appeal. These two models are part of the LifeStyle series, crafted to enhance living spaces while offering efficient heating solutions.

One of the most striking features of the Montana series is its contemporary design. Both models boast large viewing areas framed by sleek lines, allowing for an unobstructed view of the beautiful flames. The Montana-42, with its 42-inch width, provides a larger fire display, creating a dramatic focal point in any room. The Montana-36, while slightly smaller, still offers a captivating fire view that can effortlessly enhance a space's ambiance.

In terms of technology, these fireplaces are equipped with Heat & Glo’s innovative IntelliFire™ ignitions system. This advanced ignition technology ensures reliable and safe startup with minimal effort. Homeowners appreciate the convenience of remote control operation, enabling them to adjust flame height and heat output to suit their preferences without leaving their seats.

Efficiency is a cornerstone of the Montana series. Both models are designed to maximize heat output while minimizing fuel consumption. With high-efficiency ratings, they not only provide warmth but also contribute to the overall energy savings in the home. This is particularly beneficial in colder climates where heating can significantly increase energy costs.

Another noteworthy feature of the Montana fireplaces is the customizable aesthetics. Consumers can choose from a range of liner options, media types, and decorative fronts to create a personalized look that fits their unique style. The ability to tailor the fireplace to individual tastes ensures that it becomes a seamless fit within any interior design scheme.

Moreover, the Montana-42 and Montana-36 are designed with ease of installation in mind, offering installation flexibility that accommodates various spaces and building requirements. The sealed combustion system enhances safety by drawing air from outside for combustion, preventing the depletion of indoor air.

In conclusion, the Heat & Glo LifeStyle Montana-42 and Montana-36 gas fireplaces are exemplary choices for homeowners seeking a blend of efficiency, modern design, and customizable features. With advanced technology that promotes ease of use and energy efficiency, these models stand out as significant additions to contemporary living spaces. Whether you opt for the larger Montana-42 or the slightly more compact Montana-36, both fireplaces promise to deliver warmth and aesthetic charm that enhances the comfort of your home.