Heat & Glo LifeStyle Montana-42, Montana-36 Listing and Code Approvals, Appliance Certification

Page 4

1 Listing and Code Approvals

A. Appliance Certification

This fireplace system has been tested and listed in accor- dance with UL 127 standard by Underwriters Laboratories Inc. for installation and operation in the United States.

This fireplace has been tested and listed for use with the op- tional components specified in this manual. These optional components may be purchased separately and installed at a later date.

Installation of a dual cooling air kit is required and must be installed at the time of the initial fireplace installation. Failure to do so may result in a fire causing property damage and/or personal injury.

Heat & Glo LifeStyles Collection is a registered trademark of Hearth & Home Technologies Inc.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this fireplace. For assistance or additional information consult a qualified installer, service agency or your dealer.

Not intended for use as a primary heat source.

This fireplace is tested and approved as a decorative fireplace. It should not be factored as a primary heat source in residential heating calculations.

WARNING

Fire Risk

Do not install or operate damaged fireplace.

Do not modify fireplace.

Installation other than as instructed by Hearth & Home Technologies Inc. is strictly prohibited.

Do not operate the fireplace without fully assembling all components.

Do not overfire.

Do not install an unvented gas log set. This fireplace has not been tested for use with unvented gas log sets.

Installation and/or use of any component part not approved by Hearth & Home Technologies.

Hearth & Home Technologies disclaims any responsibility for, and the warranty and agency listing will be voided by the above actions.

4

Heat & Glo LifeStyles Collection • Montana • 4039-150 Rev I • 08/06

Image 4
Contents Models Montana-36 Montana-42 Woodburning Fireplace Fire RiskGrate Listing Label Information/LocationNumber Table of Contents Appliance Certification Listing and Code ApprovalsNot intended for use as a primary heat source Getting Started Design and Installation ConsiderationsMoisture Resistance Typical Fireplace System Typical Fireplace SystemInspect Fireplace and Components Tools and Supplies NeededFire Risk Explosion Risk Freestanding Installations see Figure Framing and ClearancesSelecting Fireplace Location Exterior Walls see FigureFreestanding Installation Clearances Clearances to Combustible MaterialsSidewalls/Surrounds Frame the FireplaceChimney Requirements Install the Dual Cooling Air Kit Installation of FireplaceFire Risk Sharp Edges Asphyxiation Risk Secure the Fireplace Position the FireplaceChimney Assembly Height of Chimney ComponentsUsing Offsets/Returns ¨ TableInstall the Ceiling Firestops Assemble the Chimney SectionsDouble-check the Chimney Assembly Install the Attic Insulation ShieldSecure the Chimney Complete the Enclosure Chimney TerminationInstall the Termination Cap Chase TopInstalling an ST1175 Square Termination Cap Gas Log/Lighter Provisions AccessoriesGas Code, Ansi Z223.1 Hearth Extension FinishingHearth Extension Insulation Alternatives, R Value = Mantel Finishing MaterialGlass Doors Operating Instructions General InformationOutside Air Clear Space Near the FireplaceFlue Damper FirescreenGrate Wood FuelStarting a Fire Troubleshooting Diagnostics and Problem SolvingMaintenance and Servicing the Fireplace Chimney Inspection/CleaningDisposal of Ashes Firebox RefractoryMaintenance Task List When cleaning glass doorClean Chimney FireFireplace Dimensions Reference MaterialsFireplace Components DescriptionChimney Components Catalog #432 mm 13-3/8 340 mm 51 mm Woodburning Termination Cap Service Parts Montana SeriesDescription of Part Herringbone refractory available post week 3/04This page intentionally left blank This page intentionally left blank This page intentionally left blank Warranty For Heat & GLO Fireplaces Limited WarrantyContact Information

Montana-42, Montana-36 specifications

The Heat & Glo LifeStyle Montana-42 and Montana-36 gas fireplaces represent a notable fusion of modern design and advanced technology, catering to homeowners seeking both functionality and aesthetic appeal. These two models are part of the LifeStyle series, crafted to enhance living spaces while offering efficient heating solutions.

One of the most striking features of the Montana series is its contemporary design. Both models boast large viewing areas framed by sleek lines, allowing for an unobstructed view of the beautiful flames. The Montana-42, with its 42-inch width, provides a larger fire display, creating a dramatic focal point in any room. The Montana-36, while slightly smaller, still offers a captivating fire view that can effortlessly enhance a space's ambiance.

In terms of technology, these fireplaces are equipped with Heat & Glo’s innovative IntelliFire™ ignitions system. This advanced ignition technology ensures reliable and safe startup with minimal effort. Homeowners appreciate the convenience of remote control operation, enabling them to adjust flame height and heat output to suit their preferences without leaving their seats.

Efficiency is a cornerstone of the Montana series. Both models are designed to maximize heat output while minimizing fuel consumption. With high-efficiency ratings, they not only provide warmth but also contribute to the overall energy savings in the home. This is particularly beneficial in colder climates where heating can significantly increase energy costs.

Another noteworthy feature of the Montana fireplaces is the customizable aesthetics. Consumers can choose from a range of liner options, media types, and decorative fronts to create a personalized look that fits their unique style. The ability to tailor the fireplace to individual tastes ensures that it becomes a seamless fit within any interior design scheme.

Moreover, the Montana-42 and Montana-36 are designed with ease of installation in mind, offering installation flexibility that accommodates various spaces and building requirements. The sealed combustion system enhances safety by drawing air from outside for combustion, preventing the depletion of indoor air.

In conclusion, the Heat & Glo LifeStyle Montana-42 and Montana-36 gas fireplaces are exemplary choices for homeowners seeking a blend of efficiency, modern design, and customizable features. With advanced technology that promotes ease of use and energy efficiency, these models stand out as significant additions to contemporary living spaces. Whether you opt for the larger Montana-42 or the slightly more compact Montana-36, both fireplaces promise to deliver warmth and aesthetic charm that enhances the comfort of your home.