White Rodgers 1F94W-71 At the same time. The display will, At the same time again. The display

Page 15

To adjust heat anticipation, press CLOCKSET and

ADV

at the same time. The display will

DAY

show HEAT 18 (this is the factory prepro- grammed heating anticipation setting). You may select any anticipation setting from 4 to 40 (note that for add-on heat pump sys- tems, a minimum anticipation setting of

10is recommended). Whenever adjusting anticipation, increase or decrease the dis- played number by only one or two digits, then let the system run for a while to see if the adjustment is sufficient. If the heat cycles

are too short, press TIME to increase the

FWD

cycle time. If the heat cycles are too long,

press BACKTIME to decrease the cycle time. To

set cooling anticipation, press SET and

CLOCK

ADV

at the same time again. The display

DAY

will show COOL 14 (factory preprogrammed

cooling anticipation). Use the

TIME

and

FWD

BACKTIME

buttons to adjust anticipation. To set

auxiliary heat anticipation, press

CLOCKSET

and

ADV

at the same time again. The display

DAY

will show AUX 8 (factory preprogrammed

cooling anticipation). Use the

TIME

and

FWD

TIME

buttons to adjust anticipation. Press

BACK

PRGMRUN to return to your program.

•LOW BATTERY INDICATOR — The word BATTERY will flash on the display if the 9 volt alkaline battery is low and should be replaced.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 1F94W-71 About Your New Thermostat Programming Your Thermostat Questions and AnswersYour NEW THERMOSTAT’S Operating Your ThermostatYour NEW THERMOSTAT’S Features To turn thermostat OFF be UseBack of The Thermostat Body Parts of the ThermostatUse Display Time SET Thermostat Buttons System Time SET View Hold Operating Features Automatic Changeover Convertibility Press Time TWO Hour Temperature OverCooling anticipation. Use Buttons to adjust anticipation. PressAt the same time. The display will At the same time again. The displayHEAT/EMER/OFF COOL/AUTO Total Keypad Lockout Programming Your Thermostat Your Home 70F Cooling Temperatures Heating/Cooling Schedule Plan Sample Set Current Time and Day Entering Your ProgramGramming after this happens, press Prgmview until Program Heating/Cooling TemperaturesProgram Heating/Cooling Times Heating Temperatures Page Using the HOLD/COPY BUTTON, or Mostat OFF Before Reattaching the Thermostat to the Subbase Program Cooling TemperaturesOperation. USE To Turn TherButton, or press Using The HOLD/COPY ButtonTo select the day you want to PressThermostat to subbase. Then press Programming Your Thermostat How can I permanently change a part of my program?Time FWD and Back Time to change Gramming Your ThermostatING Your Thermostat Why can’t I program the thermostat in the Auto mode?Until Ating Your Thermostat Display is flashing BATTERY. What does this mean?See Operating Your THERMO- Stat Why is the system turning on and off so frequently seldom? Ming Your Thermostat Part No -5525A
Top Page Image Contents