•TWO HOUR TEMPERATURE OVER-
RIDE — Pressoruntil the display shows the temperature you want. The ther- mostat will override current programming and keep the room temperature at the se- lected temperature for two hours. After two hours, the thermostat will automatically re- vert to the program.
•HOLD TEMPERATURE — The thermostat can hold any temperature within its range for an indefinite period, without reverting to
the program. Press HOLDCOPY . HOLD will be displayed. Then choose the desired hold
temperature by pressing or . The thermostat will hold the room temperature
at the selected setting until you press PRGMRUN to start program operation again. This fea- ture is ideal for energy conservation when
the building is unoccupied for an extended period of time.
• °F/°C CONVERTIBILITY — Press TIME
FWD
and BACKTIME at the same time until the tem- perature display is in °C (Celsius). To dis- play °F, repeat the process.
•ADJUSTABLE HEATING AND COOLING CYCLE TIMES (ANTICIPATION) — If the heating/cooling system is turning on and off too often (short cycles) or not often enough (long cycles), you may want to adjust the anticipation setting.
!CAUTION
A cooling anticipation setting of less than 10 may cause decreased compres- sor life.
14