QUESTIONS AND ANSWERS
1.How can I permanently change a part of my program?
Press PRGMVIEW until you reach the time/tem- perature schedule you want. Then press
or | and TIMEFWD and BACKTIME to change |
the program (remember, when you change the time, you are changing it for both the heating and cooling programs). See PRO-
GRAMMING YOUR THERMOSTAT.
2.How can I have no change in tempera- ture from one time period to another?
Simply select the same temperature for each consecutive time period. For example, you may select the same COOL A tempera- ture for period 2 as you did for period 1,
which means the temperature will not change from COOL A when period 2 begins. See
PROGRAMMING YOUR THERMOSTAT.
3.How can I finish my programming if the display has already changed to time/ temperature?
During programming, if no buttons are pressed for five minutes, the thermostat will enter the HOLD mode and maintain a con- stant temperature. The display will change to the time/temperature mode. To resume
programming, press PRGMVIEW until you return to
the point where you stopped programming. Then you may continue to program the thermostat normally. If you want to stop
33