EXAMPLE: 
This display window shows that for Monday’s heating/cooling period 1, the start time is 5:00 AM, and 70° is the programmed tem- perature (this example reflects factory pre- programming, where 70° is the HEAT A temperature).
3.To change the displayed start time to your selected start time for Monday’s period 1,
press TIMEFWD or BACKTIME until your selected time appears. The time will change in 15 minute increments. The time you select will be the start time of Monday’s period 1 for both heating and cooling.
4.If the temperature displayed is not the HEAT A, B, C, or D temperature you want for
Monday’s period 1, press 
or 
(if
you continue to press 
or 
, the display will alternately display the HEAT A, B, C, or D temperatures you previously selected).
5.After selecting the desired heating tempera- ture for heating/cooling Monday’s period 1,
press PRGMVIEW . The currently programmed start time and heating temperature for Monday’s heating/cooling period 2 will be displayed.
6.Repeat steps 3 and 4 to select the start time and heating temperature for Monday’s heat- ing/cooling period 2.
7.Repeat steps 3 through 6 for Monday’s heating/cooling periods 3 and 4.
27