Chapter 3: Provisioning | August 7, 2006 |
Configure Optical Thresholds Purpose:
On ENIUs that have optical interfaces, these commands configure the alarm thresholds associated with the power levels of the optical connections.
Command: [RW, SECURE privilege]
SET [NETWORKSUBSCRIBER] OPTICAL RECEIVE THRESHOLD OMAAVERAGE threshold SET [NETWORKSUBSCRIBER] OPTICAL TRANSMIT THRESHOLD OMAAVERAGE threshold
The threshold value is specified in milliwatts.
Status command: [all privileges]
GET OPTICAL THRESHOLDS
Monitor Performance
Purpose:
View and reset 15 minute and daily performance totals.
Command:[RW, SECURE privilege]
CLEAR PERFORMANCE STATUS
Status Commands: [all privileges]
GET [DAY] PERFORMANCE STATUS
The
Interface Status
Purpose:
View link status and alarm conditions.
Command:[all privileges]
GET INTERFACE STATUS
System Commands
Temperature
Purpose:
Shows the internal operating temperature of the system.
Command: [all privileges]
GET TEMPERATURE
Optical Power Purpose:
On ENIUs that have optical interfaces, this command shows the level of optical power being received. Command: [all privileges]
