August 7, 2006

Chapter 3: Provisioning

Craft Port Configuration

Purpose:

Configure user interaction with the command line interpreter.

Note: The Craft port interface has fixed communications settings of 115200 baud, 8 bits, 1 stop bit, no parity, and no flow control.

Command:[RW, SECURE privilege]

SET IDLE TIMEOUT <minutes>

Identifies the number of minutes that the Craft port can remain idle before a logged in user is logged off. Command:[all privileges]

SET ECHO ONOFF

Controls character echo for the current session.

Status Commands: [all privileges]

GET CONFIGURATION

System Name

Purpose:

Configure the system name.

Command:[RW, SECURE privilege]

SET SYSTEM NAME <name>

CLEAR SYSTEM NAME

Status Commands: [all privileges]

GET CONFIGURATION

OAM Configuration

The ENIU supports standard IEEE 802.3ah OAM operation as well as several extensions that allow its functionality to be used across a VLAN.

Configure OAM for IEEE 802.3ah Operation

Purpose:

Configure OAM to operate as an IEEE 802.3ah device.

Command:[RW, SECURE privilege]

SET OAM CONFIGURATION

Status Commands: [all privileges]

GET CONFIGURATION

AIWN-UM-7001-01

3-5

Page 23
Image 23
ADC Network Unit user manual SET Echo Onoff, Clear System Name, SET OAM Configuration