|
|
| INSTALLATION INSTRUCTIONS |
|
|
Operator: Save these insructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.
DESCRIPTION
This
If in doubt about whether your wiring is millivolt, line, or low voltage, have it inspected by a qualified heating and air conditioning contractor, electrician, or someone familiar with basic electricity and wiring.
CONTENTS |
|
Description | 1 |
Precautions | 1 |
Specifications | 2 |
Installation | 2 |
New Installation |
|
Select Thermostat Location |
|
Route Wires to Location |
|
Replacement Installation |
|
Remove Old Thermostat |
|
Attach Subbase to Wall |
|
Attach Thermostat to Subbase |
|
Operation | 6 |
System Configuration |
|
A. Set Group A Option Switches |
|
B. Set Group B Option Switches |
|
C. Electric Heat Systems |
|
Check Thermostat Operation |
|
Fan Operation |
|
Heating System |
|
Cooling System |
|
Troubleshooting |
|
PRECAUTIONS
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes and ordinances.
This control is a precision instrument, and should be handled carefully. Rough handling or distorting compo- nents could cause the control to malfunction.
!CAUTION
To prevent electrical shock and/or equipment damage, disconnect electric power to system, at main fuse or circuit breaker box, until installation is complete.
!WARNING
Do not use on circuits exceeding specified volt- age. Higher voltage will damage the control and could cause shock or fire hazard.
Do not short out terminals on gas valve or primary control to test. Short or incorrect wiring will burn out thermostat and could cause personal injury and/or property damage.
| PART NO. | |
EMERSON ELECTRIC CO. | Printed in U.S.A. | |
9797 REAVIS ROAD | Replaces | |
RST. LOUIS, MISSOURI |
| 9517 |