Optional Heater Accessory, Retainer, Bracket

Accessory Installation

Continued

5.Insert brick panel, beveled edge first, through firebox opening. Tilt and angle top edge into brick retainer until beveled edge contacts imager and panel is flat against firebox (see Figure 17).

6.Align hearth pan bracket over holes near lower edge of brick panel and secure with 2 pan screws provided.

7.Replace refractory bracket using 2 screws removed in step 4, page 9.

8.Repeat steps 5 through 7 for opposite panel assembly.

9.Replace each screen assembly by po- sitioning screen rod into locating holes under top edge of firebox and securing with 2 Phillips screws removed in step 2, page 9.

Note: Rods may have to be angled into locating holes at the top of each screen pocket. Once inserted, pull free end of rod forward until it lines up over farthest mount- ing hole respectively so rods overlap.

10.Replace log bed over hearth opening and center between grate and viewing screen.

11.Replace glass doors if removed. See Optional Glass Doors, page 8.

Face Panel

(Models E36L

and E36LH

Only)

	Refractory	Hearth Pan Bracket
	Bracket	Hearth Pan Bracket
	Bracket	(Models E36L and
		(Models E36L and
		E36LH Only)

Figure 16 - Removing Refractory Bracket

and Hearth Pan Bracket

	Refractory	Refractory
		Retainer
	Bracket
		Bracket

Hearth Pan

Bracket

Figure 17 - Installing Brick Panels and

Brackets

OPTIONAL HEATER ACCESSORY

WARNING: Disconnect power before attempting any maintenance or cleaning to re- duce the risk of fire, electrical shock or personal injury.

Blower/heater kit model BHKE is available for models E36/32L and E36/32LB. Either of 2 types of blower/heater assemblies can be installed.

1.Open upper control door (see Figure 10, on page 7) and remove 2 Phillips screws below heater grill on control panel (see Figure 18, page 11).

2.Remove 2 Phillips screws holding control cover to control panel inside firebox (see Figure 14, page 9).

3.Slide control cover to the right and swing out locking tabs from notched openings on top (see Figure 18, page 11).

4.Let control cover hang down off har- nesses. Be careful not to damage any wiring. If necessary, unscrew harness strap at blower mount to gain slack.

5.Remove 2 hex screws at rear of blower mount (see Figure 18, page 11).

www.desatech.com

111076-01F

E32LB, E36L, E36LH, E32L, E32LH specifications

The Desa E32L, E32LBH, E32LH, E36LB, and E36LBH are part of a versatile range of container handling equipment designed for efficient operations in various industrial environments. These models are particularly known for their robust performance, durability, and user-friendly features, making them suitable for both indoor and outdoor applications.

The Desa E32L and E32LBH are characterized by their compact designs, which allow for easy maneuverability in tight spaces. These models are equipped with advanced lifting technologies, including hydraulic systems that ensure smooth and precise lifting. The E32L model is specifically designed for lighter loads, making it ideal for warehouses and manufacturing settings where space is limited.

On the other hand, the E32LBH variant adds a height-adjustable feature, allowing operators to adapt to different working conditions without compromising stability. This flexibility makes it a favored choice in varied environments, including distribution centers where changes in load height are common.

The E32LH model stands out with its extended reach capabilities. This feature is particularly beneficial in environments where access to tall or stacked goods is necessary, enhancing productivity by minimizing the need for additional equipment. The E32LH also maintains the core benefits of the E32 series, providing reliable performance with a strong focus on operator safety.

Shifting focus to the E36LB and E36LBH, these models cater to heavier lifting tasks. The E36 series incorporates enhanced lifting capacity and stability, essential for handling bulk materials or larger pallets. The robust build and powerful hydraulic systems offer improved performance in demanding applications, ensuring that heavy loads are transported safely and efficiently.

All models in the Desa E series are integrated with ergonomic features aimed at enhancing user comfort. This includes adjustable handles and controls that reduce operator fatigue during long shifts. Furthermore, safety features such as overload protection and anti-slip surfaces are standard, ensuring that operators can work confidently without compromising safety.

In terms of technology, the E series utilizes advanced engineering that emphasizes energy efficiency and low maintenance costs. The hydraulic systems are designed for longevity, and the overall construction of these machines is aimed at withstanding harsh industrial environments.

With a commitment to innovation and efficiency, the Desa E32L, E32LBH, E32LH, E36LB, and E36LBH models reflect modern advancements in material handling technology, making them invaluable assets for businesses seeking to optimize their operational productivity and safety.