Desa E36LH, E36LBH, E32LH, E32LBH installation manual Table of Contents, Safety

Page 2

Table of Contents

Safety

2

Maintenance

16

Product Specification

3

Technical Service

23

Installation

3

Replacement Parts

23

Features and Operation

7

Parts

24

Accessory Installation

8

Accessories

27

Troubleshooting

14

Warranty

Back Cover

Wiring Diagram

15

 

 

Safety

WARNING: Electrical wiring must comply with local build- ing codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified service techni- cian to inspect the fireplace and replace any part of the electrical system.

CAUTION: Extreme caution is necessary when any heater is used by or near children or inva- lids and whenever the heater is left operating and unattended.

1.Read all instructions before using this fireplace.

2.This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot sur- faces. If provided, use handles when ac- cessing fireplace controls. Keep combus- tible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet from front of fireplace.

3.Extreme caution is necessary when any heater is used by or near children or inva- lids and whenever heater is left operating and unattended.

4.Always place main power switch in OFF position when not in use.

5.Do not operate fireplace if any part has been damaged or is malfunctioning.

6.Any repairs to this fireplace should be done by a qualified service person.

7.Do not use outdoors.

8.This fireplace is approved for installation in bedrooms.

9.Under no circumstances should this fireplace be modified. Parts having to be removed for servicing must be replaced prior to operating this fireplace.

10.This fireplace is not intended for use in bathrooms, laundry areas and similar locations where it would be subject to excessive moisture.

11.This fireplace may not be installed out- doors or in an unenclosed space where exposed to the elements.

12.To disconnect this fireplace, turn off at circuit breaker or fuse panel.

13.This appliance, must be electrically grounded in accordance with local codes and the National Electric Code, ANSI/ NFPA No. 70 or in Canada with CSA C22.1 Canadian Electrical code.

14.Do not insert or allow foreign objects to enter any ventilation or exhaust openings. This may cause an electrical shock, fire or damage to fireplace.

15.To prevent a possible fire do not block air intakes or exhaust.

16.This fireplace has hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint or flammable liquids are used or stored. This fireplace should not be used to dry clothing or for hanging decorations.

17.Use this fireplace only as described. Any other use not recommended by the manu- facturer may cause fire, electric shock or injury to persons.

18.SAVE THESE INSTRUCTIONS.



www.desatech.com

111076-01F

Image 2
Contents Electric Fireplace OWNER’S Operation and Installation Manual Table of Contents SafetyLocating Fireplace Product SpecificationInstallation Installation Clearances For mantel clearances see Figures 3BUILT-IN Installation Electrical InstallationRemoving Shipping Brace Features and Operation Lamps and lava RockAccessory Installation Optional Glass DoorsScrew Bifold doors may be removed for replacing or cleaningOptional Brick Liners Bracket Optional Heater AccessoryRetainer Mount location with on I indicator Wired for convenienceHarness Strap Mounting Screws Heater Blower Assembly Knockout Plug Remove to Install Power SwitchHeater Circuit Diagrams Remount harness strap to blower mount, if removedConnecting Heater Wires Terminal D Switch Jumper Terminal L-5 LeadTroubleshooting Observed Problem Possible Cause RemedyWiring Diagram Heater Assembly Electrical DiagramMaintaining Motors MaintenanceReplacing Light Bulbs Removing/Replacing Control DoorServicing Control Panel Accessing Imaging Unit Viewing ScreenServicing Flame Pennants Screw Fan Assembly Posts for Blade ConnectorsServicing Fan Blower Base CoverReplacing Lamp Fixtures Locating Flame PennantsReplacing Reflective Ribbons Replacing Fixtures Shown without FIrebox for ClarityRemove any loose or damaged ribbon material Cleaning Viewing ScreenAccessing Imaging Unit For Replacement Parts Under Warranty Technical ServiceReplacement Parts Parts Not Under WarrantyParts Parts KEY Description Bifold Glass Door Kits AccessoriesPerimeter Trim Kits Fixed Glass Door KitsLimited 1 Year Warranty WarrantyKeep this Warranty