Desa (V)V42EPA(1) Product Identification, Local Codes, Continued, Safety Information

Page 3
Continued

SAFETY INFORMATION

Continued

5.This fireplace reaches high temperatures. Keep children and adults away from hot surfaces to avoid burns or clothing igni- tion. Fireplace will remain hot for a time after shutdown. Al- low surfaces to cool before touching.

6.Carefully supervise young children when they are in the room with fireplace.

7.Do not modify this fireplace under any circumstances. Any parts removed for servicing must be replaced prior to operat- ing fireplace.

8.Turn fireplace off and let cool before servicing, installing, or repairing. Only a qualified service person should install, ser- vice, or repair this fireplace. Have fireplace inspected annu- ally by a qualified service person.

9.You must keep control compartments, burners, and circulat- ing air passages clean. More frequent cleaning may be needed due to excessive lint and dust from carpeting, bedding mate- rial, etc. Turn off the gas valve and pilot light before cleaning fireplace.

10.Have venting system inspected annually by a qualified service person. If needed, have venting system cleaned or repaired. See Cleaning and Maintenance, page 27.

11.Keep the area around your fireplace clear of combustible ma- terials, gasoline, and other flammable vapor and liquids. Do not run fireplace where these are used or stored. Do not place items such as clothing or decorations on or around fireplace.

12.Do not use this fireplace to cook food or burn paper or other objects.

13.Do not use any solid fuels (wood, coal, paper, cardboard, etc.) in this fireplace. Use only the gas type indicated on fireplace nameplate.

14.This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Ca- nadian Electrical Code, CSA C22.1.

15.Do not use fireplace if any part has been exposed to or under water. Immediately call a qualified service person to arrange for replacement of the unit.

16.Do not operate fireplace if any log is broken.

17.Do not use a blower insert, heat exchanger insert, or other ac- cessory not approved for use with this fireplace.

18.Do not operate fireplace with glass door removed, cracked, or broken.

19.Provide adequate clearances around air openings.

SAFETY INFORMATION

3

PRODUCT IDENTIFICATION

LOCAL CODES

 

 

 

PRODUCT IDENTIFICATION

Upper Louver

 

Panel

Flue Collar

Nailing

 

Flange

 

 

Log

Glass

Set

 

Door

 

Assembly

 

 

Lava

 

Rock

Control

 

 

Valve

 

Grate

 

 

Lower

Glowing

Assembly

Louver

 

Panel

Embers

 

 

ON/OFF/REMOTE Switch

Blower Switch

 

(Optional Installation)

 

(Optional Installation)

 

 

Figure 1 - Victorian Direct-Vent Fireplace with Electronic Ignition

LOCAL CODES

Install and use fireplace with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANSI Z223.1/NFPA 54* (USA) or the current CSA-B149.1 Instal- lation Code (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT IDENTIFICATIONFor moreLOCAL CODESFor morevisit www..comManual backgroundvisit www.Manual backgroundManual backgroundManual background.comManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

111907-01A

Image 3
Contents Do not touch any electrical switch OWNER’S OPERATION AND INSTALLATION MANUALFOR YOUR SAFETY FOR YOUR SAFETY WHAT TO DO IF YOU SMELL GASTABLE OF CONTENTS SAFETY INFORMATIONWARNINGS SAFETY INFORMATION PRODUCT IDENTIFICATIONLOCAL CODES ContinuedPRODUCT FEATURES PRE-INSTALLATION PREPARATIONLOCATION AND SPACE REQUIREMENTS Continued CLEARANCESFRAMING AND FINISHING PRE-INSTALLATION PREPARATIONLOCATION OF TERMINATION CAP LOCATION OF TERMINATION CAPD E B L V G V AINSTALLATION PRECAUTIONS VENTING INSTALLATION INSTRUCTIONSContinued INSTALLATION PLANNINGHorizontal Termination Installation VENTING INSTALLATION INSTRUCTIONSVENTING INSTALLATION INSTRUCTIONS VENTING INSTALLATION INSTRUCTIONSContinued Continued Horizontal Termination ConfigurationsVENTING INSTALLATION INSTRUCTIONS VENTING INSTALLATION INSTRUCTIONSVENTING INSTALLATION INSTRUCTIONS ContinuedRecommended Applications Venting with Two 90 Elbows VENTING INSTALLATION INSTRUCTIONSContinued Venting with Two 90 ElbowsContinued INSTALLATION FOR VERTICAL TERMINATIONFlat Ceiling Installation VENTING INSTALLATION INSTRUCTIONSVenting with Two 90 Elbows Vertical Termination ConfigurationsVENTING INSTALLATION INSTRUCTIONS ContinuedVertical Venting HIGH ALTITUDE INSTALLATIONVENTING INSTALLATION INSTRUCTIONS ContinuedModel BK Installation FIREPLACE INSTALLATIONINSTALLING OPTIONAL BLOWER ACCESSORY DESA Venting AccessoriesFIREPLACE INSTALLATION 8.Plug in blower power cordContinued Continued Model BKT InstallationBlower Wiring Diagram FIREPLACE INSTALLATIONINSTALLING GAS PIPING TO FIREPLACE LOCATION FIREPLACE INSTALLATIONContinued CHECKING GAS CONNECTIONS CONNECTING FIREPLACE TO GAS SUPPLYInstallation Items Needed Pressure Testing Gas Supply Piping SystemREMOVING/REPLACING GLASS DOOR Pressure Testing Fireplace Gas ConnectionsCleaning Glass Door See Cleaning and Maintenance on pageINSTALLING LOGS, LAVA ROCK AND GLOWING EMBERS FIREPLACE INSTALLATIONContinued Figure 44 - Installing Log No FIREPLACE INSTALLATIONFIREPLACE INSTALLATION Figure 41- Installing Log NoFIREPLACE INSTALLATION WIRING DIAGRAMWALL SWITCH INSTALLATION OPTIONAL REMOTE CONTROL INSTALLATION Model WRCTO TURN OFF GAS TO APPLIANCE FOR YOUR SAFETY READ BEFORE LIGHTINGOPERATING FIREPLACE LIGHTING INSTRUCTIONSBURNER FLAME PATTERN OPERATING OPTIONAL BLOWER ACCESSORYPILOT ASSEMBLY INSPECTING BURNERSLOGS CLEANING AND MAINTENANCEGLASS DOOR PILOT AND BURNERSREMEDY TROUBLESHOOTINGOBSERVED PROBLEM POSSIBLE CAUSEOBSERVED PROBLEM REMEDYing Gas Connections, pages 20 and TROUBLESHOOTINGModels VV42ENA1, VV42ENSA1, VV42ENHA1 ILLUSTRATED PARTS BREAKDOWNMODELS ILLUSTRATED PARTS BREAKDOWNPARTS LIST PARTS LISTBURNER ASSEMBLY FOR MODELS VV42ENA1, VV42ENSA1 VV42ENHA1, VV42EPA1,3 VV42EPSA1, AND VV42EPHA1ILLUSTRATED PARTS BREAKDOWN NUMBER PARTS LISTPARTS LIST PARTSPECIFICATIONS REPLACEMENT PARTSSERVICE HINTS TECHNICAL SERVICEOWNERS REGISTRATION FORM TAPE Postage RequiredTAPE WALL MOUNTED ON/OFF SWITCH - GWMS2 Not Shown ACCESSORIESFLEXIBLE GAS LINE CONNECTOR - GA5081 REMOTE CONTROL KIT - WRC SERIES Not ShownLIMITED WARRANTY DIRECT-VENTFIREPLACE NOT A UPCWARRANTY INFORMATION