Desa CGFP28P and CGFP28PT, Unvented Propane/Lp Gas Fireplace, Installation, Continued

Page 10
Manual background

Manual backgroundManual backgroundManual background CGFP28P and CGFP28PT

UNVENTED PROPANE/LP GAS FIREPLACE

INSTALLATION

Continued

INSTALLING GA3650T

BLOWER ACCESSORY

(For CGFP28PT Model Only)

NOTICE: Shut-off gas supply and disconnect heater from gas sup- ply. Contact a qualified service person to do this.

1.Remove fireplace screen (see Figure 15).

Manual background WARNING: You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.

2.If logs are installed, carefully remove the logs and set aside, noting the prop- erly mounted location of each.

3.Remove screws that attach log base as- sembly to fireplace. Carefully lift up log base assembly and remove from fire- place, taking care to pull flexible gas line through the access holes (see Figure 16).

Manual background CAUTION: Do not pick up log base assembly by burners. This could damage burners. Only handle base by grates.

4.Attach power cord to blower motor by firmly pushing the two female termi- nals of the power cord onto the two spade terminals on blower motor. Us- ing screw provided, attach ringed ter- minal of power cord to mounting tab of blower housing (see Figure 17). Tighten screw securely.

5.Place the blower against lower rear wall of firebox outer wrapper with the ex- haust port directed upward. Align the holes in top mounting tabs of blower with holes in wall of wrapper (see Fig- ure 17). Using 2 screws provided, mount blower and tighten screws securely.

6.Be certain that all wire terminals are securely attached to terminals on blower motor and that the screw retain- ing the green ground wire is tight.

7.Place control knob provided on plastic control shaft of speed control.

8.Mount the speed control on the front leg of the left floor support bracket us- ing 2 screws provided (see Figure 18).

Notches

Screen Mounting Screws

Figure 15 - Removing Fireplace Screen

Flexible

Gas Line

Screws

Log Base

Figure 16 - Removing Log Base from Fireplace

Lower

Rear Wall

of Firebox

Blower

Screws

Exhaust Port

Top Mount- ing Tab

Manual background Power Cord

Figure 17 - Mounting Blower to Firebox

Left Floor

Support

Bracket

Screws

Speed

Manual background Control

Control

Control Shaft

Knob

Figure 18 - Attaching Speed Control to Firebox

10

103414

Image 10
Contents WHAT TO DO IF YOU SMELL GAS OWNER’S OPERATION AND INSTALLATION MANUALCGFP28P AND CGFP28PT Do not try to light any applianceUNVENTED PROPANE/LP GAS FIREPLACE SAFETY INFORMATIONCGFP28P and CGFP28PT WARNINGSLOCAL CODES PRODUCT IDENTIFICATIONUNPACKING AIR FOR COMBUSTION AND VENTILATION PRODUCT FEATURESSAFETY FEATURES OPERATIONDETERMINING FRESH-AIRFLOW FOR FIREPLACE LOCATION ContinuedAIR FOR COMBUSTION AND VENTILATION UNVENTED PROPANE/LP GAS FIREPLACE VENTILATION AIRCGFP28P and CGFP28PT AIR FOR COMBUSTION AND VENTILATIONELECTRICAL HOOKUP When Using Optional Blower INSTALLATIONCHECK GAS TYPE CGFP28P and CGFP28PT INSTALLING GA3650T BLOWER ACCESSORYINSTALLATION UNVENTED PROPANE/LP GAS FIREPLACEIf your fireplace system is installed OPERATING THE BLOWERINSTALLATION ContinuedCGFP28P and CGFP28PT INSTALLATIONINSTALLING GA3650T BLOWER ACCESSORY UNVENTED PROPANE/LP GAS FIREPLACEContinued INSTALLATIONa. If your fireplace system is installed Operating the BlowerINSTALLATION INSTALLATION CLEARANCESCONVENTIONAL FIREPLACE INSTALLATION CGFP28P and CGFP28PTINSTALLATION BUILT-INFIREPLACE INSTALLATIONCheck Local Building Codes ContinuedCGFP28P and CGFP28PT INSTALLING GAS PIPING TO FIREPLACE LOCATIONINSTALLATION UNVENTED PROPANE/LP GAS FIREPLACECHECKING GAS CONNECTIONS Pressure Testing Gas Supply Piping SystemCGFP28P and CGFP28PT INSTALLATIONPressure Testing Fireplace Gas Connections UNVENTED PROPANE/LP GAS FIREPLACEINSTALLATION INSTALLING LOGSContinued LIGHTING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE LIGHTINGOPERATING FIREPLACE TO TURN OFF GAS TO APPLIANCEFOR YOUR SAFETY READ BEFORE LIGHTING MANUAL LIGHTING PROCEDURETHERMOSTAT CONTROL OPERATION OPERATING FIREPLACEPILOT FLAME PATTERN INSPECTING BURNERSVARIABLE MANUAL CONTROL OPERATION FRONT BURNER FLAME PATTERNCLEANING AND MAINTENANCE LOGSCGFP28P and CGFP28PT TROUBLESHOOTINGOBSERVED PROBLEM UNVENTED PROPANE/LP GAS FIREPLACEContinued TROUBLESHOOTINGMaintenance, page Refer to Air for Combustion and VentiUNVENTED PROPANE/LP GAS FIREPLACE TROUBLESHOOTINGCGFP28P and CGFP28PT ContinuedTECHNICAL SERVICE SERVICE HINTSSPECIFICATIONS PARTS CENTRALSCGFP28P and CGFP28PT ILLUSTRATED PARTS BREAKDOWNCGFP28P UNVENTED PROPANE/LP GAS FIREPLACEPART NUMBER PARTS LISTCGFP28P DESCRIPTIONPARTS LOG BASE ASSEMBLYILLUSTRATED BREAKDOWNCGFP28PT LOG BASE ASSEMBLY THERMOSTAT- CONTROLLED MODELPARTS LIST UNVENTED PROPANE/LP GAS FIREPLACE FIREPLACECGFP28P and CGFP28PT ILLUSTRATEDFIREPLACE CGFP28P CGFP28PT PARTS LISTPARTS UNDER WARRANTY REPLACEMENT PARTSACCESSORIES PARTS NOT UNDER WARRANTYPage Model Serial No Date Purchased WARRANTY INFORMATIONNOT A UPC 2701 Industrial Drive P.O. Box Bowling Green, KY