OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Bottom Mid | Top Log (#4) |
| |
Log (#2) |
|
| Rear Log (#1) |
Rear Burner
Base
Gas Regulator
Front Burner
Front Log (#3)
Figure 1 - Log Base Assembly
Top Louvered
HoodTop Outer
Casing
Firebox
Support
Rear Access Door
Screen Assembly
Bottom Louver
Assembly
Figure 2 - Fireplace
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
CAUTION: Do not remove the metal data plates from the grate assembly. The data plates contain important product information.
1.With utility knife, cut the carton all the way around above the staples on the bottom tray. Lift the carton off the fire- box. Remove packing.
2.Locate two screws above top corners of the fireplace screen. Remove and discard these screws. Lift fireplace screen up and pull out to remove.
3.Remove protective packaging applied to logs, log base assembly, and fireplace.
4.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought fireplace.
103414 | 3 |